Airtac JSID Double Rod Cylinder JSID32X75S
The AirTAC Airtac JSID Double Rod Cylinder JSID32X75S is a genuine double acting, double rod JIS-standard air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID32X75S
Delivering 345 N of thrust in both directions at 0.5 MPa, the AirTAC JSID32X75S uses a twin-rod layout on a 32 mm bore to give identical push and pull forces. The hard-anodized aluminum profile barrel keeps the overall body shorter than a same-bore ISO 15552 unit, and the G1/8 port keeps pneumatic plumbing compact.
Because the piston rod passes through both covers, the moving mass travels a symmetric load path that resists torsional twist. This 32 mm version yields a safe working load of roughly 207 N, which is enough to vertically lift about 18 kg with a 2:1 safety margin. The -S suffix means a built-in magnet is present for CMSE or DMSE switches to drop into the side grooves.
Airtac JSID Double Rod Cylinder JSID32X75S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID32X75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID32X75S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID32X75S Is Used
Twin-Tool Synchronization
Drives two opposing forming tips simultaneously from one piston, ensuring parallel contact on small component crimps without torsional deflection.
Anti-Rotation Guiding
The symmetric dual-rod path prevents the end plate from twisting during short 75 mm clamping strokes on thin film cutting heads.
Dual-End Sensor Cam
Uses the rear rod extension to trigger a CMSE reed switch, confirming retraction while the front face handles the primary pick-and-place work.
Is the Airtac JSID Double Rod Cylinder JSID32X75S the Right Cylinder?
If you need to step up from this 32 mm bore (345 N at 0.5 MPa), the 40 mm size provides 528 N each way; dropping below 32 mm hits the lower family limit. Choose this double-rod configuration when your mechanism demands anti-rotation guidance, needs to drive two tools at once, or requires a sensor cam at the back end. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet allows CMSE/DMSE sensors to track position. For any stroke at or above 300 mm, always support the load with an external guide to prevent side-load damage to the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID32X75S FAQ
It generates 345 N at 0.5 MPa and 483 N at 0.7 MPa. Because it is a double-rod cylinder, this force is identical in both directions, with a theoretical maximum of 70 kgf at 1.0 MPa. The 32 mm bore uses a G1/8 port, a 12 mm rod, and adjustable 20 mm cushions at both ends.
No, a standard double-rod cylinder will drift if air is lost or the valve is centered, as the adjustable air cushion only decelerates the piston near the stroke ends rather than locking it. To maintain a vertical load safely, you must add an external rod lock or a pilot-operated check valve to the system.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.