Airtac JSID Double Rod Cylinder JSID50X75S
The AirTAC Airtac JSID Double Rod Cylinder JSID50X75S is a genuine double acting, double rod JIS-standard air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ50 mm
- Stroke75 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID50X75S
Delivering 825 N of equal force in both directions at 0.5 MPa, this double-acting 50 mm bore cylinder uses a twin-rod layout to eliminate rotational twist. The hard-anodized extruded aluminium profile keeps the overall body shorter than a same-bore ISO 15552 unit. A rod exits each end to drive opposing tooling or mount a sensor cam, maintaining a symmetric load path.
The G1/4 port feeds a piston that yields a safe working load of roughly 495 N, which translates to lifting about 42 kg vertically with a 2:1 margin. Because this SKU carries the -S suffix, it includes a piston magnet for CMSE/DMSE switches that drop directly into the barrel grooves. Adjustable air cushions at both ends decelerate the 75 mm stroke smoothly.
Airtac JSID Double Rod Cylinder JSID50X75S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID50X75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | 1155 N |
| Max (@1.0 MPa) | 200 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID50X75S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 50 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID50X75S Is Used
Dual-End Transfer
Simultaneously pushes and pulls two parallel workpieces from opposite ends with identical 825 N force.
Symmetric Lift Station
Raises and lowers a 42 kg vertical payload using both rods to maintain a balanced, non-twisting load path.
Cam-Driven Sorting
Uses the rear rod extension as a mechanical cam to trigger external proximity sensors on the return cycle.
Is the Airtac JSID Double Rod Cylinder JSID50X75S the Right Cylinder?
Size both ways against this 50 mm bore, which outputs 825 N each way at 0.5 MPa. Step down to the 40 mm bore for 528 N, or move up to the 63 mm bore for 1402 N when you need heavier equal push and pull. Choose this twin-rod format when your mechanism demands anti-rotation guidance, symmetric load distribution, or back-end sensing. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. The -S magnet enables precise end-of-stroke detection. For any stroke at or over 300 mm, always support the load with an external guide to prevent side-load binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID50X75S FAQ
Force is equal in both directions because the rod passes through both covers. It generates 825 N at 0.5 MPa and 1154 N at 0.7 MPa, with a theoretical maximum of 168 kgf at 1.0 MPa. The air port size is G1/4.
No, a plain double-rod cylinder drifts without live air, as the adjustable 20.5 mm cushions only decelerate the piston near stroke end. To hold a load securely, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID50X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.