Airtac JSID Double Rod Cylinder JSID50X900
The AirTAC Airtac JSID Double Rod Cylinder JSID50X900 is a genuine double acting, double rod JIS-standard air cylinder with a Ø50mm bore and 900mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ50 mm
- Stroke900 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID50X900
Delivering 825 N of thrust in both directions at 0.5 MPa, this 50 mm bore double-rod cylinder brings symmetric power to demanding setups. The twin-rod layout creates an equal push and pull force while preventing piston rotation. It yields a safe working load of roughly 495 N, which is enough to vertically lift about 42 kg with a 2:1 margin.
Built to JIS standards with an extruded hard-anodized aluminum profile barrel, the unit is noticeably shorter than an ISO 15552 cylinder of the same bore. Air enters via a G1/4 port, and adjustable cushions decelerate the stroke at each end. Note this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors without switching to the -S variant.
Airtac JSID Double Rod Cylinder JSID50X900 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID50X900 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 900 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | 1155 N |
| Max (@1.0 MPa) | 200 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID50X900
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 50 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID50X900 Is Used
Twin-Tool Transfer
Drives two synchronized end-effectors from a single piston, ensuring perfectly matched timing on a 900 mm parts transfer line.
Anti-Rotation Indexing
The dual rods prevent twist during long 900 mm extensions, keeping precision clamps perfectly aligned on packaging machinery.
Symmetric Lift Station
Provides equal force both ways to raise and lower a 42 kg vertical load platform, maintaining a balanced load path without drift.
Is the Airtac JSID Double Rod Cylinder JSID50X900 the Right Cylinder?
This 50 mm bore sits between the 32 mm option, offering 345 N each way, and the 63 mm size, providing 1402 N. Choose a double-rod configuration when your application demands anti-rotation guidance, twin tooling driven from both ends, or a symmetric load path. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this model has no -S suffix, it cannot support magnetic sensing. The 900 mm stroke is substantial; always use external guides to prevent rod bending and manage side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID50X900 FAQ
Because the rod exits both ends, force is equal in both directions: 825 N at 0.5 MPa and 1154 N at 0.7 MPa. The theoretical maximum is 168 kgf at 1.0 MPa. It uses a G1/4 port, operates at 30-800 mm/s, and has a 20 mm rod with an M18x1.5 thread.
No, this SKU lacks a magnet and cannot take CMSE or DMSE sensors. Additionally, the adjustable air cushion only decelerates the piston near stroke end; it does not lock. For a suspended load, you must install an external rod lock or a pilot-operated check valve to prevent drifting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID50X900
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.