Airtac JSID Double Rod Cylinder JSID63X1000
The AirTAC Airtac JSID Double Rod Cylinder JSID63X1000 is a genuine double acting, double rod JIS-standard air cylinder with a Ø63mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID63X1000
Delivering 1402 N of equal thrust in both directions at 0.5 MPa, this 63 mm bore double-rod actuator uses a G3/8 port and a 1000 mm stroke. Because a rod exits each end on a shared piston, the working area is identical on extension and retraction, completely eliminating the force differential found in single-rod units. This symmetric layout also resists torsional twist and doubles your mounting options for tooling or sensor cams.
The extruded hard-anodized aluminium profile barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 cylinder. At 0.5 MPa it handles a safe working load of about 841 N, which translates to lifting roughly 71 kg vertically with a 2:1 safety margin. This plain SKU lacks a piston magnet, so it cannot accept CMSE or DMSE switches without upgrading to the -S variant.
Airtac JSID Double Rod Cylinder JSID63X1000 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID63X1000 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 318 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID63X1000
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID63X1000 Is Used
Dual-Station Transfer
Drives two parallel conveyor diverters simultaneously from opposite rod ends, keeping the 1000 mm stroke perfectly synchronized without adding external linkages.
Anti-Rotation Gripper Slide
Uses the twin-rod torsional stiffness to push and pull a heavy machining gripper over 1000 mm, preventing yaw deflection during high-speed part transfer.
Symmetric Lift Carriage
Balances a vertical lifting platform evenly across both rod ends, carrying approximately 71 kg with a 2:1 safety margin at 0.5 MPa.
Is the Airtac JSID Double Rod Cylinder JSID63X1000 the Right Cylinder?
Sizing around the 63 mm bore means looking at the 1402 N equal force at 0.5 MPa on both faces. If your application is lighter, the 50 mm bore provides 825 N each way; stepping up to the 80 mm bore yields 2268 N. A double-rod design is the right call when you need anti-rotation stability, twin tooling driven from both ends, or a symmetric load path. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because this is a 1000 mm stroke, you must support the load with external guides to prevent rod bending and excessive side loading. Remember that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve for held loads, as the 29 mm adjustable air cushions only decelerate near stroke end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID63X1000 FAQ
The 63 mm bore produces 1402 N of force at 0.5 MPa and 1962 N at 0.7 MPa. Because it is a double-rod cylinder, this force is identical in both push and pull directions. The theoretical maximum is 286 kgf at 1.0 MPa. It uses a G3/8 port, an M18x1.5 rod thread, and adjustable air cushions of 29 mm at each end.
No, this specific SKU does not have a piston magnet, so it cannot accept CMSE or DMSE magnetic switches. If you need position sensing, you must select the -S variant of this cylinder, which includes the magnet for switch mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID63X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.