Airtac JSID Double Rod Cylinder JSID63X100S
The AirTAC Airtac JSID Double Rod Cylinder JSID63X100S is a genuine double acting, double rod JIS-standard air cylinder with a Ø63mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke100 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID63X100S
Delivering 1402 N of thrust in both directions at 0.5 MPa, the AirTAC JSID63X100S uses a twin-rod layout to provide identical push and pull force. Because the piston rod passes through both covers, the effective pressure area is symmetric, eliminating the force differential found in single-rod designs. This 63 mm bore actuator features a G3/8 port and adjustable 29 mm air cushions at each end.
Built to JIS standards with an extruded hard-anodized aluminum profile barrel, this unit is noticeably shorter than an ISO 15552 cylinder of the same bore. The twin rods create a symmetric load path that resists torsional twist, making it ideal for non-rotating guidance. The -S suffix denotes a built-in piston magnet for drop-in CMSE or DMSE switches. Factoring a 60 percent safety margin, it handles a safe working load of about 841 N, which translates to lifting roughly 71 kg vertically.
Airtac JSID Double Rod Cylinder JSID63X100S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID63X100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 318 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID63X100S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID63X100S Is Used
Twin-Tool Transfer
Drives two synchronized grippers from opposite rod ends to transfer parts between conveyor belts without torsional deflection.
Balanced Vertical Lift
Lifts roughly 71 kg platforms using the equal bidirectional force, ensuring smooth descent without gravity-induced overrun.
Anti-Rotation Stopper
Acts as a rigid mechanical stop for incoming workpieces, using the dual rods to prevent yawing under heavy side impact.
Is the Airtac JSID Double Rod Cylinder JSID63X100S the Right Cylinder?
When sizing this actuator, the neighboring 50 mm bore yields 825 N each way at 0.5 MPa, while the larger 80 mm bore provides 2268 N. Choose the 63 mm bore when your application demands roughly 841 N of real work. A double-rod configuration is the right call when you need anti-rotation stability, twin tooling driven from both ends, or a symmetric load path. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet enables precise end-of-stroke sensing. For this 100 mm stroke, side loads are minimal, but any stroke over 300 mm requires external guide rails to prevent piston binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID63X100S FAQ
The force is equal in both directions due to the double-rod design. It outputs 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a theoretical maximum of 286 kgf at 1.0 MPa. The air port size is G3/8.
No, a plain double-rod cylinder drifts when air is removed or the valve is centered. The adjustable 29 mm cushions only decelerate the piston near the stroke ends. To hold a load securely, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID63X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.