Airtac JSID Double Rod Cylinder JSID63X150
The AirTAC Airtac JSID Double Rod Cylinder JSID63X150 is a genuine double acting, double rod JIS-standard air cylinder with a Ø63mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID63X150
Delivering 1402 N of thrust in both directions at 0.5 MPa, the AirTAC JSID63X150 uses a twin-rod layout to provide perfectly symmetric output force. Because the piston rod passes through both end covers, the effective area is identical on the extend and retract strokes, eliminating force mismatch. This JIS-standard profile cylinder features an extruded hard-anodized aluminum barrel, making it significantly shorter and more compact than a same-bore ISO 15552 unit.
The G3/8 port feeds a 63 mm bore that generates a safe working load of roughly 841 N, which translates to lifting about 71 kg vertically with a 2:1 safety margin. A rod extending out the back end is ideal for driving a secondary tool or mounting a sensor cam, while the dual-rod design naturally resists torsion and provides anti-twist guidance. Note that this specific SKU lacks a magnet, so it cannot accept CMSE/DMSE position sensors without upgrading to the -S variant.
Airtac JSID Double Rod Cylinder JSID63X150 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID63X150 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 318 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID63X150
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID63X150 Is Used
Twin-Tool Indexing
Drives two opposing forming tools simultaneously from a single piston, keeping cycle forces balanced and reducing mechanical stress on the press frame.
Anti-Rotation Gripper
Powers a precision clamping jaw that cannot twist under offset loads, ensuring the grip face stays perfectly parallel to the workpiece.
Symmetric Lift Station
Lifts roughly 71 kg of vertical load with a 2:1 margin, using the rear rod to carry a counterweight cam for smooth elevation control.
Is the Airtac JSID Double Rod Cylinder JSID63X150 the Right Cylinder?
When sizing this double-rod unit, the neighboring 50 mm bore offers 825 N each way at 0.5 MPa, while the larger 80 mm bore provides 2268 N. The 63 mm bore sits comfortably in the middle, delivering 1962 N at 0.7 MPa. Choose a double-rod configuration when your mechanism demands anti-rotation stability, symmetric load paths, or twin tooling driven from one piston. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. For any stroke at or above 300 mm, always support the load with an external guide to prevent side-loading damage to the seals. Remember that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve if you need to hold a load securely, as the adjustable 29 mm cushions only decelerate near the stroke ends.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID63X150 FAQ
The 63 mm bore provides equal force in both directions: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a theoretical max of 286 kgf at 1.0 MPa. It uses a G3/8 port, an M18x1.5 rod thread, and adjustable 29 mm air cushions at both ends.
No, this specific SKU does not have a magnet and cannot accept CMSE or DMSE sensors. You must select the -S variant of the JSID series to enable magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID63X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.