Airtac JSID Double Rod Cylinder JSID63X160
The AirTAC Airtac JSID Double Rod Cylinder JSID63X160 is a genuine double acting, double rod JIS-standard air cylinder with a Ø63mm bore and 160mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke160 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID63X160
Delivering 1402 N of equal force in both directions at 0.5 MPa, this 63 mm bore double-rod actuator uses a G3/8 port to balance pressure perfectly. Its twin-rod architecture creates a symmetric load path that resists torsional twist, making it ideal for non-rotating guidance and driving twin tooling simultaneously from a single piston.
Built to JIS standards with an extruded hard-anodized aluminum profile barrel, the body is noticeably shorter and more compact than a same-bore ISO 15552 cylinder. It yields a safe working load of roughly 841 N, which translates to lifting about 71 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors without switching to the -S variant.
Airtac JSID Double Rod Cylinder JSID63X160 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID63X160 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 318 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID63X160
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID63X160 Is Used
Twin-Spindle Lifting
Drives two synchronized tooling heads from opposite rod ends, ensuring perfectly balanced vertical lifting without torsional deflection.
Symmetric Transfer Arm
Powers a dual-sided transfer mechanism where the rear rod pushes a return cam while the front rod carries the main payload.
Anti-Rotation Gate Diverter
Uses the inherent torsional resistance of the dual-rod design to actuate a heavy sorting flap without needing external linear guides.
Is the Airtac JSID Double Rod Cylinder JSID63X160 the Right Cylinder?
Sizing this actuator requires checking both neighbors: stepping down to the 50 mm bore drops the equal-both-ways force to 825 N at 0.5 MPa, while the larger 80 mm bore raises it to 2268 N. Choose the double-rod format when your mechanism demands anti-rotation stability, a symmetric load path, or back-end sensor cam tracking. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Because the 160 mm stroke is well under the 1500 mm standard limit, standard side-load guidance rules apply, but always support the rod end on strokes of 300 mm or longer. Remember that a plain cylinder drifts on air loss; the adjustable 29 mm cushions only decelerate near the end caps, so add an external rod lock or pilot-operated check valve if you need to hold a load vertically.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID63X160 FAQ
Because the rod exits both ends, the push and pull forces are equal: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a theoretical maximum of 286 kgf at 1.0 MPa. It features a 63 mm bore, a 20 mm rod, a G3/8 port, adjustable 29 mm cushions, and operates at speeds of 30-800 mm/s.
No, this specific SKU does not include a magnet and therefore cannot accept CMSE or DMSE switches. You must select the -S variant of this model to enable magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID63X160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.