Airtac JSID Double Rod Cylinder JSID63X175
The AirTAC Airtac JSID Double Rod Cylinder JSID63X175 is a genuine double acting, double rod JIS-standard air cylinder with a Ø63mm bore and 175mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke175 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID63X175
Delivering 1402 N of thrust in both directions at 0.5 MPa, this 63 mm bore double-rod actuator uses a symmetric piston design to eliminate rotational twist. The hard-anodized aluminum profile barrel keeps the overall body shorter than a same-bore ISO 15552 unit, while the G3/8 port handles the air flow.
With a rod extending from each end, you can drive two opposing tools or mount a rear sensor cam without extra linkages. Based on the 0.5 MPa rating, it handles a safe working load of about 841 N, which translates to lifting roughly 71 kg vertically with a 2:1 safety margin. This plain SKU lacks a magnet and cannot accept CMSE or DMSE switches.
Airtac JSID Double Rod Cylinder JSID63X175 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID63X175 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 318 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID63X175
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID63X175 Is Used
Twin-Spindle Drilling
Drives two opposing machining heads simultaneously using the rods exiting both covers, ensuring perfectly synchronized cutting cycles.
Symmetric Transfer Gate
Shifts a diverting gate from either end of the stroke, using the equal push and pull force to maintain a balanced load path during part routing.
Anti-Rotation Lift Arm
Raises and lowers a 71 kg vertical platform without twisting, relying on the dual rods to guide the load smoothly through the 175 mm travel.
Is the Airtac JSID Double Rod Cylinder JSID63X175 the Right Cylinder?
This 63 mm bore yields 1402 N each way at 0.5 MPa; sizing down to the 50 mm bore drops the equal-both-ways force to 825 N, while stepping up to the 80 mm bore raises it to 2268 N. Choose the double-rod layout when your mechanism needs anti-rotation guidance, a symmetric load path, or twin tooling driven from one piston. Mounting options include FA, LB, TC, TCM1, and TCM2. For this 175 mm stroke, ensure external guide rails carry the side load to prevent binding. To detect position, select the -S magnet variant for CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID63X175 FAQ
Because the rod passes through both covers, the push and pull forces are equal. It generates 1402 N at 0.5 MPa and 1962 N at 0.7 MPa in both directions, with a theoretical maximum of 286 kgf at 1.0 MPa. The air port size is G3/8.
No, a plain double-rod cylinder will drift if air is lost or the valve is centered. The adjustable 29 mm air cushions only decelerate the piston near the stroke ends and do not act as a brake. For a held vertical load, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID63X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.