Airtac JSID Double Rod Cylinder JSID63X200
The AirTAC Airtac JSID Double Rod Cylinder JSID63X200 is a genuine double acting, double rod JIS-standard air cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID63X200
Delivering 1402 N of thrust in both directions at 0.5 MPa, this 63 mm bore double-rod actuator uses a symmetric piston design to eliminate force mismatch. The hard-anodized aluminum profile barrel makes it shorter and more compact than a same-bore ISO 15552 cylinder, while the twin rods resist torsional twist.
Because the rod passes through both covers, you can mount tooling or a sensor cam at the back end simultaneously. This non-magnet SKU cannot take a switch, so order the -S variant if you need CMSE/DMSE sensing. With a safe working load around 841 N, it handles roughly 71 kg lifted vertically with a 2:1 margin. Pneumatic connection is via a G3/8 port.
Airtac JSID Double Rod Cylinder JSID63X200 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID63X200 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 318 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID63X200
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID63X200 Is Used
Twin-Spindle Drilling
Drive two opposing drill heads simultaneously using both rod ends, keeping the cutting force perfectly balanced at 1402 N each way.
Symmetric Transfer Pusher
Push a workpiece forward while retracting a return cam at the back, using the equal push-pull dynamics to maintain a smooth conveyor rhythm.
Anti-Rotation Gripper Slide
Lift roughly 71 kg of vertical load with a 2:1 safety margin, relying on the dual rods to prevent jaw twist during heavy pick-and-place cycles.
Is the Airtac JSID Double Rod Cylinder JSID63X200 the Right Cylinder?
Flanked by the 50 mm bore at 825 N and the 80 mm bore at 2268 N, this 63 mm unit provides a solid 1402 N equal-both-ways output at 0.5 MPa. Choose the double-rod layout when your machine needs anti-rotation guidance, symmetric load paths, or twin-tool drives. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Since this is a non-magnet model, it cannot accept sensors; add the -S suffix for CMSE/DMSE switches. For this 200 mm stroke, ensure external guide rails are used to absorb side loads and prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID63X200 FAQ
It delivers 1402 N at 0.5 MPa and 1962 N at 0.7 MPa. Because it is a double-rod cylinder, this force is equal in both directions. The theoretical maximum is 286 kgf at 1.0 MPa. It features a 63 mm bore, a 200 mm stroke, a G3/8 port, and adjustable air cushions of 29 mm at each end.
No, a standard double-rod cylinder drifts when air is removed or a valve is centered. The 29 mm adjustable cushions only decelerate the piston near the end caps; they do not lock the load. For vertical holding, you must fit an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID63X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.