Airtac JSID Double Rod Cylinder JSID63X225
The AirTAC Airtac JSID Double Rod Cylinder JSID63X225 is a genuine double acting, double rod JIS-standard air cylinder with a Ø63mm bore and 225mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke225 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID63X225
Delivering 1402 N of thrust in both directions at 0.5 MPa, this 63 mm bore double-rod cylinder uses a single piston with a rod exiting each end. This symmetric layout creates an equal pressure area on both faces, completely eliminating push-pull force mismatch. The extruded hard-anodized aluminum profile barrel keeps the overall body shorter than a same-bore ISO 15552 unit.
With a G3/8 port and a 225 mm stroke, it offers a safe working load of about 841 N, which is enough to vertically lift roughly 71 kg with a 2:1 safety margin. A rod out the back is ideal for mounting a sensor cam or driving a second tool. Note this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE switches without switching to an -S variant.
Airtac JSID Double Rod Cylinder JSID63X225 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID63X225 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 318 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID63X225
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID63X225 Is Used
Twin-Tool Transfer
Drives two opposing grippers simultaneously from one piston, keeping pick-and-place timing perfectly synchronized.
Anti-Rotation Edge Guide
Uses the dual rods to resist torsional twist during high-speed web guiding, maintaining precise lateral tracking.
Symmetric Forming Press
Applies equal clamping force from both ends of a fixture to prevent workpiece distortion during light stamping.
Is the Airtac JSID Double Rod Cylinder JSID63X225 the Right Cylinder?
Sizing this actuator requires comparing the equal-both-ways force against adjacent bores: the 50 mm bore yields 825 N each way at 0.5 MPa, while the larger 80 mm bore provides 2268 N. The 63 mm bore hits a balanced 1402 N. Choose a double-rod configuration when your mechanism demands anti-rotation stability, symmetric load paths, or twin tooling driven from one piston. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because the stroke is 225 mm, ensure external guide rails carry any lateral load to prevent binding. Add the -S suffix if you need magnetic position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID63X225 FAQ
The G3/8 port feeds a 63 mm bore that outputs 1402 N at 0.5 MPa and 1962 N at 0.7 MPa. Because the rod passes through both covers, this force is identical in both directions. The theoretical maximum at 1.0 MPa is 286 kgf.
No, a plain double-rod cylinder drifts without live air; the adjustable 29 mm cushions only decelerate the piston near stroke end. For vertical load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID63X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.