Airtac JSID Double Rod Cylinder JSID63X450S
The AirTAC Airtac JSID Double Rod Cylinder JSID63X450S is a genuine double acting, double rod JIS-standard air cylinder with a Ø63mm bore and 450mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke450 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID63X450S
Delivering 1402 N of thrust in both directions at 0.5 MPa, this 63 mm bore double-rod actuator uses a single piston with a rod exiting each cover. The twin-rod layout creates a symmetric load path that resists torsional twist, making it ideal for driving two mechanisms simultaneously or mounting a rear sensor cam. Its hard-anodized extruded aluminum barrel keeps the overall body shorter than a same-bore ISO 15552 unit.
This -S variant carries a built-in piston magnet for drop-in CMSE or DMSE switches. Operating on a G3/8 port at 0.15 to 1.0 MPa, it handles a safe working load of about 841 N, which translates to lifting roughly 71 kg vertically with a 2:1 safety margin. Adjustable 29 mm air cushions at both ends tame deceleration, though you will need an external pilot-operated check valve to hold a suspended load securely.
Airtac JSID Double Rod Cylinder JSID63X450S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID63X450S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 450 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 318 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID63X450S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID63X450S Is Used
Dual-Station Transfer
Uses both rod ends to push and retract identical pallets on parallel conveyor lines simultaneously without phase lag.
Symmetric Lift Platform
Balances vertical lifting forces from both ends to prevent platform skew and keep the load perfectly level.
Cam-Actuated Sorting
Drives a front diverter while the rear rod carries a dedicated cam to trigger an external proximity sensor.
Is the Airtac JSID Double Rod Cylinder JSID63X450S the Right Cylinder?
Sizing around the 63 mm bore means looking at the neighbors: a 50 mm bore gives 825 N both ways at 0.5 MPa, while an 80 mm bore jumps to 2268 N. Choose this 63 mm model when your application demands equal push and pull force, or when the twin rods solve a mechanical problem like anti-rotation guidance, symmetric load distribution, or back-end tooling. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. The -S suffix ensures you have the magnet for position sensing. Because the stroke is 450 mm, always support the load with an external guide to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID63X450S FAQ
Because the rod passes through both covers, force is equal in both directions. It generates 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a theoretical maximum of 286 kgf at 1.0 MPa. The air port is G3/8.
No. The internal 29 mm adjustable air cushions only decelerate the piston near the stroke ends; they do not lock the position. If you need to hold a load securely, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID63X450S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.