Airtac JSID Double Rod Cylinder JSID80X200
The AirTAC Airtac JSID Double Rod Cylinder JSID80X200 is a genuine double acting, double rod JIS-standard air cylinder with a Ø80mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID80X200
Delivering 2268 N of thrust in both directions at 0.5 MPa, the AirTAC JSID80X200 uses a twin-rod layout to provide identical push and pull power. A rod exits both ends on a single piston, which creates a symmetric load path and naturally resists torsional twist for non-rotating guidance. This JIS profile unit is notably shorter than an ISO 15552 cylinder of the same 80 mm bore, built around a hard-anodized aluminum extrusion.
With its G3/8 port and 29 mm adjustable cushions at each end, it handles dynamic loads smoothly. The 2268 N output translates to a safe working load of roughly 1361 N, or about 116 kg lifted vertically with a 2:1 safety margin. This specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors without upgrading to the -S variant.
Airtac JSID Double Rod Cylinder JSID80X200 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID80X200 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 513 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID80X200
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID80X200 Is Used
Dual-End Transfer Pusher
Synchronizes two packaging lanes at once by pushing simultaneously from both rod ends, ensuring perfectly timed product transfers without torsional deflection.
Symmetric Stamping Die
Drives matched upper and lower forming tools with equal 2268 N force on the advance and retract, maintaining strict mechanical parallelism during sheet metal work.
Balanced Lift Platform
Lifts roughly 116 kg of vertical load with a 2:1 safety margin, using the twin rods to prevent platform twisting during elevation and descent.
Is the Airtac JSID Double Rod Cylinder JSID80X200 the Right Cylinder?
When sizing this unit, the adjacent 63 mm bore yields 1402 N each way, while the larger 100 mm bore provides 3574 N at 0.5 MPa. The 80 mm bore sits perfectly in the middle, giving 2268 N of equal bidirectional force. Choose this double-rod architecture when your mechanism demands anti-rotation stability, needs to drive two tools simultaneously, or requires a sensor cam on the back end. It supports Basic, FA, LB, TC, TCM1, and TCM2 mounts. For the 200 mm stroke, ensure external guide rails are used to absorb lateral stress and prevent side-loading. Remember that this non-magnetic SKU cannot host position switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID80X200 FAQ
Because the rod passes through both covers, force is equal in both directions. It generates 2268 N at 0.5 MPa and 3175 N at 0.7 MPa each way, with a theoretical maximum of 463 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, and the air port size is G3/8.
No, a plain double-rod cylinder will drift and cannot hold a load without live air. The 29 mm adjustable air cushions only decelerate the piston near the stroke ends; they do not act as a brake. For secure load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID80X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.