Airtac JSID Double Rod Cylinder JSID80X600
The AirTAC Airtac JSID Double Rod Cylinder JSID80X600 is a genuine double acting, double rod JIS-standard air cylinder with a Ø80mm bore and 600mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke600 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID80X600
Delivering 2268 N of thrust in both directions at 0.5 MPa, this 80 mm bore double-rod actuator uses a symmetric piston to eliminate push-pull force disparity. The extruded hard-anodized aluminum profile barrel keeps the overall body shorter than a same-bore ISO 15552 unit. A rod exits each end, creating an anti-twist load path ideal for driving twin tooling or mounting a rear sensor cam.
With a 600 mm stroke, this G3/8 ported model handles substantial work, offering a safe working load of roughly 1361 N or a vertical lift capacity of about 116 kg with a 2:1 margin. Note this specific SKU lacks a magnet and cannot accept CMSE/DMSE switches. The adjustable 29 mm air cushions decelerate the piston near stroke ends, but an external rod lock or pilot-operated check valve is required to hold a load securely on air loss.
Airtac JSID Double Rod Cylinder JSID80X600 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID80X600 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 513 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID80X600
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID80X600 Is Used
Dual-Station Transfer
Drives two parallel conveyor diverters simultaneously using the opposing rod ends, keeping the 600 mm stroke perfectly synchronized without external linkages.
Balanced Lift Platform
Lifts roughly 116 kg of vertical load with a 2:1 safety margin, leveraging the equal-both-ways force to prevent gravity-induced drift during directional changes.
Anti-Rotation Forming Press
Applies 2268 N of clamping force through a symmetric load path, preventing piston twist during heavy-duty metal forming operations over the long 600 mm travel.
Is the Airtac JSID Double Rod Cylinder JSID80X600 the Right Cylinder?
Sizing around the 80 mm bore, the smaller 63 mm variant provides 1402 N each way, while the larger 100 mm bore offers 3574 N. Choose this double-rod configuration when your mechanism demands anti-rotation guidance, symmetric load distribution, or twin tooling driven from both ends. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because this is a non-magnetized SKU, position sensing is unavailable without switching to an -S variant. For the 600 mm stroke, external guide rails are strongly recommended to prevent rod bending and absorb side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID80X600 FAQ
The force is equal in both directions due to the double-rod design: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a theoretical maximum of 463 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a 1.5 MPa proof pressure.
No to both. The adjustable 29 mm cushions only decelerate the piston near the stroke ends; they do not hold load on air loss, so you need an external rod lock or pilot-operated check valve. Additionally, this specific SKU has no magnet and cannot take CMSE/DMSE sensors; you must specify the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID80X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.