Airtac JSID Double Rod Cylinder JSID80X600S
The AirTAC Airtac JSID Double Rod Cylinder JSID80X600S is a genuine double acting, double rod JIS-standard air cylinder with a Ø80mm bore and 600mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke600 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID80X600S
Delivering 2268 N of thrust in both directions at 0.5 MPa, the AirTAC JSID80X600S uses a twin-rod layout to provide identical push and pull power. A piston rod exits both ends, which creates a symmetric load path and prevents torsional twist during travel. This JIS profile body is notably shorter than a same-bore ISO 15552 unit, and the hard-anodized aluminum extrusion omits tie rods for a clean exterior. The G3/8 port feeds the 80 mm bore, and the -S suffix means a piston magnet is fitted for drop-in CMSE or DMSE switches.
With a 0.5 MPa input, the 2268 N output translates to a safe working load of about 1361 N, or roughly 116 kg lifted vertically with a 2:1 safety margin. The 600 mm stroke runs at 30-800 mm/s, and adjustable 29 mm air cushions decelerate the mass at each end. Note that the cushions only slow the piston; an external rod lock or pilot-operated check valve is required to hold a load securely.
Airtac JSID Double Rod Cylinder JSID80X600S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID80X600S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 513 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID80X600S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID80X600S Is Used
Symmetric Transfer Pusher
Drives a transfer carriage from both ends to keep the load balanced and prevent yaw during long 600 mm traverses.
Twin-Tool Lift Station
Mounts a tool on each rod end to actuate two separate stations simultaneously with identical 2268 N force.
Anti-Rotation Indexer
Uses the dual rods to resist torsional twist on a heavy vertical lift, maintaining precise alignment without external guides.
Is the Airtac JSID Double Rod Cylinder JSID80X600S the Right Cylinder?
This 80 mm bore sits between the 63 mm unit (1402 N each way) and the 100 mm unit (3574 N each way) at 0.5 MPa. Choose the double-rod format when your mechanism needs anti-rotation guidance, twin tooling driven from both ends, or a rear-mounted sensor cam. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S magnet enables position sensing via CMSE/DMSE switches. Because the stroke is 600 mm, you must support the load with external guides to prevent rod bending and excessive side loading.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID80X600S FAQ
The force is equal in both directions because the rod passes through both covers. It generates 2268 N at 0.5 MPa and 3175 N at 0.7 MPa each way, with a theoretical maximum of 463 kgf at 1.0 MPa.
The -S indicates a built-in piston magnet for CMSE or DMSE position switches that mount directly into the side grooves. A standard SKU without the -S cannot accept these sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID80X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.