Airtac JSID Double Rod Cylinder JSID80X80
The AirTAC Airtac JSID Double Rod Cylinder JSID80X80 is a genuine double acting, double rod JIS-standard air cylinder with a Ø80mm bore and 80mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke80 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID80X80
Delivering 2268 N of thrust in both directions at 0.5 MPa, this 80 mm bore double-rod JIS profile cylinder uses a single piston with a rod exiting both ends. That symmetric layout creates an equal pressure area on each face, meaning push and pull forces match exactly. The extruded hard-anodized aluminium barrel keeps the unit more compact and noticeably shorter than a same-bore ISO 15552 cylinder, while the G3/8 port handles the required airflow.
Because the twin rods resist torsional twist and provide a symmetric load path, the unit drives two external tools simultaneously or carries a cam at the back. It yields a safe working load of about 1361 N, which translates to lifting roughly 116 kg vertically with a 2:1 margin. Note this plain SKU lacks a magnet and cannot take a sensor; the -S variant enables CMSE/DMSE switches.
Airtac JSID Double Rod Cylinder JSID80X80 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID80X80 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 513 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID80X80
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID80X80 Is Used
Twin-Spindle Drilling
Drives two synchronized machining heads from opposite rod ends, using the equal 2268 N force to ensure balanced feed rates on both sides of a workpiece.
Symmetric Transfer Pusher
Pushes parts from the center of a line using both rod ends, leveraging the anti-twist geometry to keep loads stable during high-speed 30-800 mm/s transfers.
Balanced Vertical Lift
Lifts roughly 116 kg with a 2:1 safety margin, using the dual rods to prevent platform rotation and maintain a perfectly vertical load path.
Is the Airtac JSID Double Rod Cylinder JSID80X80 the Right Cylinder?
Sizing an 80 mm bore means checking both neighbours: a 63 mm bore gives 1402 N each way at 0.5 MPa, while a 100 mm bore yields 3574 N. Choose this 80 mm model when you need 2268 N of equal both-ways force and the twin-rod benefits of anti-rotation guidance, symmetric load distribution, or back-end tooling. It mounts via FA, LB, TC, TCM1, or TCM2 brackets. For this 80 mm stroke, side-load is minimal, but any stroke over 300 mm requires external guide rails to prevent binding. Remember this non-magnet SKU cannot host sensors; add -S for CMSE/DMSE detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID80X80 FAQ
Because it is a double-rod cylinder, force is equal both ways using the rod-side area. It generates 2268 N at 0.5 MPa and 3175 N at 0.7 MPa in both directions, with a theoretical max of 463 kgf at 1.0 MPa. The air port is G3/8.
No, a plain cylinder drifts without live air, as the adjustable 29 mm cushions only decelerate near stroke end rather than locking. For a suspended load, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID80X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.