Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10
The AirTAC Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø125mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ125 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting, adjustable stroke
- Rod threadM27×2.0
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10
Generating 6136 N of push force at 0.5 MPa, this 125 mm bore actuator tackles heavy-duty automation with ease. The extruded hard-anodized aluminium profile barrel keeps the total length shorter than a same-bore ISO 15552 unit, saving valuable machine space. It connects via a G1/2 port and runs at 30-500 mm/s.
The -10 suffix denotes an external adjuster that shortens the EXTEND stroke on-site by up to 10 mm, letting you fine-tune the end position without swapping the cylinder. Nominal travel remains 160 mm maximum, yielding a usable 150-160 mm range while the retract end stays fixed. This configuration handles about 3682 N of real work safely, lifting roughly 313 kg vertically with a 2:1 margin. Note this SKU lacks a magnet, so it cannot accept CMSE/DMSE sensors.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø125 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 125 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10 Is Used
Heavy Press Tending
Dial in the exact 150-160 mm extraction reach using the external adjuster to clear a press die, compensating for varying tooling heights without changing the cylinder.
Pallet Positioning Stops
Use the 6136 N push force at 0.5 MPa to halt heavy pallets, fine-tuning the 10 mm extend window to align stops perfectly against different load widths.
Compact Lift Stations
Lift roughly 313 kg vertically in space-constrained cells where the shorter JIS profile saves footprint compared to a standard ISO 15552 cylinder.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10 the Right Cylinder?
Sizing spans both directions: step down to a 100 mm bore for 3927 N push at 0.5 MPa, or use this 125 mm unit when 8590 N at 0.7 MPa is required. The 10 mm adjustable window is ideal for sharing a spare across stroke variants or dialing in final end positions on-site. Mount using FA, LB, TC, TCM1, or TCM2 brackets. Because this non-magnetic SKU cannot host a sensor, add the -S variant if you need CMSE/DMSE detection. For any stroke at or above 300 mm, guide the load externally to prevent rod side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10 FAQ
At 0.5 MPa it delivers 6136 N push and 5734 N pull. At 0.7 MPa it provides 8590 N push and 8028 N pull. The theoretical maximum force is 1251 kgf at 1.0 MPa. It features a G1/2 port and a 33 mm adjustable air cushion at each end.
The external stop screw lets you shorten the EXTEND stroke on-site by up to 10 mm, giving a usable extend range of 150-160 mm from the 160 mm nominal maximum. The retract end remains fixed. This stop only sets the end position; it is not a load lock, so use an external rod lock or pilot-operated check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ125X160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.