Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20
The AirTAC Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø40mm bore and 1000mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke1000 mm
- Port sizeG1/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20
Delivering 628 N of push force at 0.5 MPa, this 40 mm bore JIS actuator brings on-site extend tuning to long-stroke automation. The external adjuster lets you shorten the extend stroke by up to 20 mm, giving a usable range of 980-1000 mm without swapping the cylinder. It handles about 377 N of real work safely, which translates to lifting roughly 32 kg vertically with a 2:1 margin. Built with an extruded hard-anodized aluminum profile barrel, the body is noticeably shorter and more compact than a same-bore ISO 15552 unit.
This double-acting single-rod model uses a G1/4 port and a 16 mm rod with an M14x1.5 thread. Because this specific SKU lacks the -S magnet option, it cannot accept CMSE or DMSE sensors. The adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold the load. For vertical or suspended loads that must resist drift on air loss, fit an external rod lock or pilot-operated check valve.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20 Is Used
Long-Reach Diverting
Fine-tune the 1000 mm extend stop by up to 20 mm on-site to perfectly align a diverting gate without machining new mounts.
Spare Parts Standardization
Keep one adjustable cylinder on the shelf to cover various 980-1000 mm stroke requirements across different packaging lines.
Guided Vertical Lowering
Lower assemblies using the 628 N thrust, relying on external guides to manage side loads over the long 1000 mm extension.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20 the Right Cylinder?
When sizing this 40 mm bore, the adjacent 32 mm bore offers 402 N push at 0.5 MPa for lighter duties, while the 50 mm bore steps up to 982 N if your payload increases. The 20 mm adjustable window is ideal for sharing a spare across slightly different stroke variants or fine-tuning the end position during machine commissioning. JSIJ mounting choices include Basic, FA, LB, TC, TCM1, and TCM2. At a 1000 mm stroke, always support the load with external guides to prevent rod bending and excessive side loading. Remember that a plain non-magnetic SKU cannot host position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20 FAQ
At 0.5 MPa it provides 628 N push and 528 N pull. At 0.7 MPa it provides 879 N push and 739 N pull. The theoretical maximum force is 128 kgf at 1.0 MPa. This 40 mm bore model features a G1/4 air port.
The external adjuster allows you to shorten the extend stroke by up to 20 mm on-site, yielding a usable extend range of 980-1000 mm. The nominal 1000 mm stroke is the maximum, and the retract end remains fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X1000-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.