Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S
The AirTAC Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø40mm bore and 175mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke175 mm
- Port sizeG1/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S
Generating 628 N of push force at 0.5 MPa, this 40 mm bore JIS profile cylinder is built for compact installations. The extruded hard-anodized aluminum body is noticeably shorter than an ISO 15552 cylinder of the same bore. It handles about 377 N of real work safely, which translates to lifting roughly 32 kg vertically with a 2:1 margin.
The -30 code means an external adjuster can shorten the extend stroke on site by up to 30 mm, giving a usable range of 145 to 175 mm while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder. This -S SKU includes a piston magnet for CMSE/DMSE sensors in the side grooves. Pneumatic connections use a G1/4 port, and adjustable air cushions of 20.5 mm decelerate the load at each end.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S Is Used
Adjustable Stop Pressing
Dial in the exact 145 to 175 mm extend position on-site for material pressing tasks that require frequent depth changes without changing fixtures.
Transfer Line Diverter
Fine-tune the diverting stroke length on a conveyor to accommodate different package sizes while using the integrated magnet for position confirmation.
Vertical Lift Stops
Lift loads up to 32 kg vertically and adjust the extend end-point by up to 30 mm to match varying shelf heights in compact storage machines.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S the Right Cylinder?
When sizing, step down to a 32 mm bore for lighter duty (402 N push at 0.5 MPa) or up to a 50 mm bore if you need 982 N. The 40 mm bore here gives 528 N of pull force at 0.5 MPa, hitting a solid middle ground. The adjustable stroke is ideal when you need on-site end-position tuning or want a shared spare across slightly different stroke variants. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a 175 mm stroke, mount a guide to prevent side-load wear on the rod. The -S magnet supports drop-in CMSE/DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S FAQ
At 0.5 MPa it pushes 628 N and pulls 528 N. At 0.7 MPa it pushes 879 N and pulls 739 N. The theoretical maximum force is 128 kgf at 1.0 MPa. The air port is G1/4.
The nominal 175 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 30 mm on site, giving a usable range of 145 to 175 mm. The retract end is fixed. This stop sets the end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X175-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.