Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S
The AirTAC Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke200 mm
- Port sizeG1/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S
Delivering 628 N of push force at 0.5 MPa, this 40 mm bore JIS profile cylinder features a 200 mm nominal stroke with an external adjuster that lets you shorten the extend travel by up to 30 mm on site. The hard-anodized aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 unit. It handles about 377 N of real work safely, which means you can lift roughly 32 kg vertically with a 2:1 margin.
Because this is the -S variant, a built-in piston magnet works seamlessly with CMSE or DMSE switches that drop directly into the side grooves. The G1/4 port and M14x1.5 rod thread match the standard 40 mm architecture. Remember that the external stop screw fine-tunes the end position but does not lock the load; you will need an external rod lock or pilot-operated check valve to hold a load securely on air loss.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S Is Used
End-Position Trimming
Dial in the exact extend stop within a 170 to 200 mm window on a clamping fixture without machining new spacers.
Divert Gate Tuning
Adjust the pusher stroke by up to 30 mm on site to accommodate different package sizes on a sorting line.
Spare Consolidation
Stock one cylinder for multiple 40 mm bore machines and set the specific extend travel during installation.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S the Right Cylinder?
When sizing this 40 mm bore, stepping down to a 32 mm bore drops the 0.5 MPa push force to 402 N, while stepping up to a 50 mm bore increases it to 982 N. The adjustable stroke is ideal for sharing one spare across multiple stroke variants or fine-tuning the end position on the machine without swapping the cylinder. You can mount it using FA, LB, TC, TCM1, or TCM2 brackets. The included -S magnet supports CMSE and DMSE sensors. For any stroke at or over 300 mm, always use a guide rail to prevent side-load damage to the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S FAQ
At 0.5 MPa it provides 628 N push and 528 N pull. At 0.7 MPa it provides 879 N push and 739 N pull. The theoretical maximum force is 128 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
The 200 mm nominal stroke is the maximum extend length. The external adjuster lets you shorten the extend stroke by up to 30 mm on site, giving a usable range of 170 to 200 mm. The retract end is fixed, and the adjuster only sets the end position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X200-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.