Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S
The AirTAC Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø40mm bore and 800mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke800 mm
- Port sizeG1/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S
Delivering 628 N of push force at 0.5 MPa, this AirTAC adjustable-stroke actuator brings on-site flexibility to long-trreach tasks. The hard-anodized aluminum profile barrel makes it shorter and more compact than an ISO 15552 cylinder of the same 40 mm bore. It carries a built-in magnet for CMSE/DMSE sensors and uses a G1/4 port.
The external adjuster lets you shorten the extend stroke by up to 100 mm on site, giving a usable range of 700-800 mm without changing the cylinder itself. It handles a safe working load of about 377 N, which is roughly 32 kg lifted vertically with a 2:1 margin. Note that the retract end is fixed, and the air cushions only decelerate the piston rather than holding the load.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 800 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S Is Used
Long-Transfer Push-Off
Pushes parts off a conveyor over an 800 mm reach, using the 100 mm adjuster to dial the exact eject position for different pallet sizes.
Adjustable Divert Gate
Actuates a routing gate where the full 800 mm stroke is occasionally shortened by 100 mm to accommodate temporary physical obstructions.
Multi-Tier Lowering
Lowers a 32 kg vertical load using the 700-800 mm extend window, tweaking the stop screw to set precise resting heights on various shelves.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S the Right Cylinder?
For sizing, the 40 mm bore pushes 628 N at 0.5 MPa; stepping down to a 32 mm bore drops that to 402 N, while a 50 mm bore raises it to 982 N. The 100 mm adjustable window is ideal when you need to fine-tune a long 800 mm end position on the machine or share a single spare across multiple stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix means the side grooves are ready for CMSE/DMSE switches. Because the stroke is 800 mm, always use an external guide to prevent rod bending and side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S FAQ
At 0.5 MPa it pushes 628 N and pulls 528 N. At 0.7 MPa it pushes 879 N and pulls 739 N. The theoretical maximum force is 128 kgf at 1.0 MPa. The cylinder uses a G1/4 port and a 16 mm rod.
The nominal 800 mm stroke is the maximum. The external stop screw lets you shorten the extend stroke by up to 100 mm on site, yielding a usable extend range of 700-800 mm. The retract end remains fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ40X800-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.