Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke100 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder brings compact power to your fixture. Its hard-anodized aluminum barrel is shorter than a same-bore ISO 15552 unit, saving valuable machine space. The G3/8 port feeds a robust 25 mm piston rod that handles about 1508 N of real work, roughly 128 kg lifted vertically with a 2:1 safety margin.
An external stop screw lets you fine-tune the extend end position on site, trimming the 100 mm nominal stroke down by 10 mm to a usable 90 mm without swapping the cylinder. The retract end stays fixed. Note that this plain SKU lacks a magnet and cannot take CMSE/DMSE sensors. The adjustable air cushions only decelerate the load near stroke end; they do not hold it on air loss, so fit an external rod lock for vertical safety.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10 Is Used
Press Fit Tuning
Dial in the exact 90 to 100 mm extend position on site to seat bearings without bottoming out the tooling.
Transfer Diverter
Adjust the extend stop by up to 10 mm to perfectly align a divert gate as belt wear changes over time.
Pallet Stopper
Set a precise end position for varying pallet heights, using the 2513 N push force to halt heavy loads reliably.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10 the Right Cylinder?
Size this 80 mm bore against the neighboring 63 mm and 100 mm options. The 63 mm gives 1559 N push at 0.5 MPa, while the 100 mm hits 3927 N, letting you step up or down for exact force needs. The 10 mm extend-shortening window is ideal when you need to dial in a final end position across shared spare cylinders. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this SKU has no -S suffix, it cannot accept magnetic switches. For any stroke at or over 300 mm, always guide the load to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10 FAQ
At 0.5 MPa it pushes 2513 N and pulls 2268 N. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical maximum force is 513 kgf at 1.0 MPa.
The nominal 100 mm extend stroke is the maximum. An external stop screw lets you shorten the extend stroke on site by up to 10 mm, giving a usable range of 90 to 100 mm. The retract end is fixed, and this stop sets position only, not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.