Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke100 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder keeps your machinery compact by being shorter than a same-bore ISO 15552 unit. The hard-anodized aluminum barrel skips external rods for a clean profile. A built-in magnet (-S) lets you drop CMSE or DMSE reed and electronic switches directly into the side grooves for exact position detection.
The -10 code means an external adjuster can shorten the extend stroke on-site by up to 10 mm, giving a usable extend range of 90 to 100 mm without swapping the cylinder. It handles about 1508 N of real work safely, which translates to lifting roughly 128 kg vertically with a 2:1 margin. Pneumatic connections use a G3/8 port, while a 29 mm adjustable air cushion at each end decelerates the load smoothly. Remember that the cushion only softens the end stop; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if you need to hold a load.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S Is Used
Press Fit Tuning
Dial in the exact 90 to 100 mm extend reach for seating bearings without remachining your press tooling.
Transfer Diverter
Adjust the extend endpoint on-site to accommodate different carton widths on a packaging line.
Vertical Lift Stop
Lift a 128 kg payload and fine-tune the upper stop position to match varying pallet heights.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S the Right Cylinder?
Size this 80 mm bore against the neighboring 63 mm and 100 mm options. The 63 mm yields 1559 N push at 0.5 MPa, whereas the 100 mm hits 3927 N, so step up if your pressure sags. The 10 mm extend-shortening window is ideal when you need to fine-tune an end position on the machine or want one shared spare across slightly different stroke variants. Mounting choices cover Basic, FA, LB, TC, TCM1, and TCM2 brackets. Because this SKU includes the -S magnet, it is ready for CMSE/DMSE sensors. For any stroke at or above 300 mm, always guide the load to prevent side-load damage to the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S FAQ
At 0.5 MPa it pushes 2513 N and pulls 2268 N. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical maximum force is 513 kgf at 1.0 MPa. It uses a G3/8 port and a 25 mm rod.
The nominal 100 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 10 mm, yielding a usable extend range of 90 to 100 mm. The retract end remains fixed, and this stop is for positioning only, not load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.