Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke100 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder features an external adjuster that lets you shorten the extend stroke on-site by up to 30 mm. The nominal 100 mm stroke remains the maximum travel, yielding a usable extend range of 70-100 mm, while the retract end stays fixed. It handles about 1508 N of real work safely, which translates to lifting roughly 128 kg vertically with a 2:1 margin.
Built with an extruded hard-anodized aluminum barrel, the body is noticeably shorter and more compact than a same-bore ISO 15552 cylinder. This -S variant includes a built-in piston magnet for CMSE/DMSE switches that drop directly into the side grooves. Air connects via a G3/8 port, and the adjustable air cushions provide 29 mm of deceleration at each end. Remember that a plain cylinder drifts on air loss; the cushion only decelerates, so fit an external rod lock for held loads.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S Is Used
Press Fit Tuning
Dial in the exact 70-100 mm extend position for seating bearings without remounting the entire actuator.
Variable Transfer Stop
Adjust the extend stop on the fly to handle different package lengths on a single sorting line.
Pallet Positioning
Leverage the 2513 N push force and on-site stroke tuning to align heavy pallets precisely before wrapping.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S the Right Cylinder?
When sizing this 80 mm bore, the neighboring 63 mm bore offers 1559 N push at 0.5 MPa for lighter duties, while the 100 mm bore steps up to 3927 N for heavier demands. The -30 mm adjustable window is ideal for fine-tuning the extend end position on-site without swapping the cylinder, making it excellent for standardizing spares across slightly different stroke variants. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix confirms the integrated magnet for CMSE/DMSE sensors. For any stroke at or above 300 mm, always use a guide rail to prevent side-load damage to the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it delivers 3518 N push and 3175 N pull. The theoretical maximum force is 513 kgf at 1.0 MPa. The air port size is G3/8.
An external stop screw lets you shorten the extend stroke by up to 30 mm on-site. The usable extend range is 70-100 mm, with the nominal 100 mm being the maximum travel. The retract end is fixed, and the stop sets the end position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X100-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.