Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder brings compact power to long-stroke tasks. Its extruded hard-anodized aluminum barrel leaves out external rods, making the overall body shorter and more compact than an equivalent ISO 15552 unit. The G3/8 port feeds the 25 mm piston rod for smooth 30-800 mm/s motion.
The -10 code defines an external adjuster that shortens the extend stroke by up to 10 mm on site, letting you fine-tune the end position between 990 and 1000 mm without swapping the cylinder. Because it safely handles about 1508 N of real work, roughly 128 kg lifted vertically, it fits demanding setups. An integrated magnet (-S) allows CMSE or DMSE switches to slot directly into the side grooves for position sensing.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S Is Used
Long-Reach Divert
Pushes heavy pallets across a wide transfer section, using the 10 mm adjuster to fine-tune the exact contact point without moving the rear mount.
High-Bay Extraction
Extracts totes from deep shelving racks where the 1000 mm reach is necessary, relying on the 2513 N thrust to overcome sliding friction.
Extended-Stroke Press
Acts as a primary mover on a long-bed press, using the adjustable stop to set precise 990 mm lower bounds for varying material thicknesses.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S the Right Cylinder?
When sizing, the neighboring 63 mm bore offers 1559 N push at 0.5 MPa for lighter loads, while the 100 mm bore steps up to 3927 N if you need more thrust. The 10 mm adjustable window is ideal for sharing one spare across stroke variants or dialing in final end positions on site. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this is a 1000 mm stroke, always use external guides to prevent rod bending and manage side loads. The built-in magnet supports CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it yields 3518 N push and 3175 N pull. The theoretical maximum is 513 kgf at 1.0 MPa, and the air port is G3/8.
The nominal 1000 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 10 mm on site, giving a usable range of 990 to 1000 mm. The retract end remains fixed. Note that this mechanism only sets end position; for load holding on air loss you need an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.