Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder features a 1000 mm stroke that can be shortened by up to 20 mm on-site via an external adjuster. The hard-anodized aluminum barrel keeps the overall body more compact than a same-bore ISO 15552 unit. It handles about 1508 N of real work safely, which translates to lifting roughly 128 kg vertically with a 2:1 margin.
This double-acting single-rod unit uses a G3/8 port and adjustable air cushions at both ends to decelerate the payload smoothly. Because this specific SKU lacks the -S magnet option, it cannot accept CMSE or DMSE sensors for position detection. The retract end remains fixed, while the extend stop lets you fine-tune the end position without swapping the cylinder.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20 Is Used
Long-Transfer Diverter
Pushes heavy pallets along a 1000 mm run, using the 20 mm extend adjuster to dial in the exact deflection angle without moving the mount.
Multi-Tier Lowering Stop
Lowers a 120 kg fixture and uses the external stop screw to fine-tune the resting height across different shelf levels on-site.
Press Pin Feeder
Extends fully to drive a pin, with the adjustable window providing a 980 mm backup stroke to accommodate varying material thicknesses.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20 the Right Cylinder?
When sizing, the neighboring 63 mm bore yields 1559 N push at 0.5 MPa, whereas stepping up to the 100 mm bore provides 3927 N, giving you clear boundaries for your force requirements. The 20 mm adjustable window is highly useful for synchronizing multiple actuators or sharing a spare across slight stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because the stroke is 1000 mm, you must use external guides to prevent rod bending and manage side loads. Remember that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve if you need to hold a load securely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20 FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it provides 3518 N push and 3175 N pull. The theoretical maximum force is 513 kgf at 1.0 MPa. This 80 mm bore unit uses a G3/8 air port and has a 25 mm piston rod with an M22x1.5 thread.
The nominal 1000 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke by up to 20 mm on-site, giving a usable extend range of 980 to 1000 mm. The retract end is fixed. This stop sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.