Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder brings compact power to long-stroke tasks. The extruded hard-anodized aluminium body is noticeably shorter than an equivalent ISO 15552 unit. It handles about 1508 N of real work safely, which translates to lifting roughly 128 kg vertically with a 2:1 margin. Air connects via a G3/8 port.
The -30 code means an external adjuster can shorten the extend stroke on-site by up to 30 mm, giving a usable range of 970 to 1000 mm while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder. This SKU lacks a magnet, so it cannot take CMSE or DMSE sensors. Note that the adjustable cushion only decelerates the piston; it will not hold a load on air loss, so fit an external rod lock for vertical safety.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30 Is Used
Transfer Line Indexing
Dials in the exact 970 mm push-off distance on a long conveyor using the external adjuster, absorbing minor pallet length variations without repositioning the cylinder.
High-Bay Pusher Arm
Leverages the 2513 N thrust to shove heavy totes into deep storage racks, fine-tuning the final 30 mm of extend stroke to avoid crushing the container.
Long-Stroke Material Alignment
Sweeps wide steel sheets into a press bed over a 1000 mm span, using the compact JIS profile to save floor space while relying on external guides for rod support.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30 the Right Cylinder?
When sizing this 80 mm bore, stepping down to a 63 mm bore drops the 0.5 MPa push force to 1559 N, while moving up to a 100 mm bore raises it to 3927 N. The 30 mm extend-shortening window is ideal for sharing a spare across stroke variants or dialling in end positions on-site. Mounting options include FA, LB, TC, TCM1 and TCM2 brackets. Because this is a non-magnet SKU, position sensing is impossible without switching to an -S version. At a 1000 mm stroke, always support the rod against side-load bending and use external guides to prevent sagging.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30 FAQ
At 0.5 MPa it pushes 2513 N and pulls 2268 N. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical maximum is 513 kgf at 1.0 MPa. The air port is G3/8, the rod is 25 mm with an M22x1.5 thread, and it has 29 mm adjustable cushions at both ends.
The 1000 mm nominal stroke is the maximum. The external stop screw lets you shorten the extend stroke on-site by up to 30 mm, yielding a usable extend range of 970 to 1000 mm. The retract end remains fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.