Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS actuator brings pneumatic muscle to long-reach jobs. The extruded hard-anodized aluminum profile barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 cylinder. A G3/8 port feeds the 25 mm rod to handle about 1508 N of real work, roughly 128 kg lifted vertically.
The -40 code means an external stop screw lets you shorten the extend stroke on-site by up to 40 mm, giving a usable range of 960-1000 mm while the retract end stays fixed. The -S suffix adds a built-in piston magnet for CMSE/DMSE switches that drop directly into the side grooves. The 29 mm adjustable air cushions at both ends decelerate the payload smoothly, though a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if you need to hold a suspended load.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S Is Used
Long-Reach Transfer
Pushes heavy pallets across a wide conveyor belt, using the 40 mm adjuster to fine-tune the exact push-off distance on-site without changing the cylinder.
High-Bay Extraction
Extracts totes from deep shelving racks, relying on the 80 mm bore thrust and external guides to prevent rod bending over the 1000 mm travel.
Press Ejection
Ejects formed parts from a deep press bed, using the adjustable end-position stop to dial in the exact ejection point for different tooling.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S the Right Cylinder?
When sizing this actuator, stepping down to a 63 mm bore drops the 0.5 MPa push force to 1559 N, while moving up to a 100 mm bore raises it to 3927 N. The adjustable-stroke window is a major advantage for sharing one spare across slightly different stroke variants or fine-tuning the end position on-site without swapping the cylinder. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Because the 1000 mm stroke invites rod bending under side loads, always guide the payload externally and avoid pure rod cantilevering. The included magnet supports CMSE/DMSE sensors for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it provides 3518 N push and 3175 N pull. The theoretical maximum force is 513 kgf at 1.0 MPa. This 80 mm bore model uses a G3/8 air port and a 25 mm piston rod.
The nominal 1000 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 40 mm, giving a usable extend range of 960-1000 mm. The retract end is fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X1000-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.