Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100
Generating 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder is built for tasks that need exact end-position tuning. The hard-anodized aluminium barrel keeps the body shorter and more compact than a same-bore ISO 15552 unit. It handles about 1508 N of real work safely, which means lifting roughly 128 kg vertically with a 2:1 margin.
The external stop screw lets you shorten the extend stroke on-site by up to 100 mm, giving a usable range of 50 to 150 mm while the retract end stays fixed. You get a 25 mm rod, an M22x1.5 rod-end thread, a G3/8 port, and 29 mm adjustable air cushions at both ends. Note that this SKU lacks a magnet, so it cannot take CMSE or DMSE sensors without switching to the -S variant.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100 Is Used
Press Tonnage Setup
Dial in the exact 50 to 150 mm extend reach for a light stamping or pressing task without swapping the entire cylinder.
Variable Transfer Stops
Adjust the stop position on the fly for different package sizes on a packaging line, using the 100 mm shortening window.
Pallet Positioning
Fine-tune the push-off distance for various pallet depths, relying on the 2513 N thrust to move heavy loads reliably.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100 the Right Cylinder?
When sizing, the 63 mm bore offers 1559 N push at 0.5 MPa, while the 100 mm bore jumps to 3927 N, so this 80 mm model sits perfectly in the middle for medium-heavy work. The 100 mm adjuster window is ideal when you want one shared spare cylinder that can cover several shorter stroke variants on-site. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. Because this plain version has no magnet, position sensing is impossible here. For any stroke over 300 mm, always use a guide rail to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100 FAQ
At 0.5 MPa it pushes 2513 N and pulls 2268 N. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical maximum force is 513 kgf at 1.0 MPa. This 80 mm bore unit uses a G3/8 air port.
The nominal stroke is 150 mm, but an external adjuster lets you shorten the extend stroke by up to 100 mm on-site, giving a usable range of 50 to 150 mm. The retract end is fixed. This mechanism only sets the end position; it does not lock the load, so you need an external rod lock or pilot-operated check valve to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.