Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder features a hard-anodized aluminum barrel that is noticeably shorter than a same-bore ISO 15552 unit. The -30 code means an external stop screw lets you shorten the extend stroke on-site by up to 30 mm, giving a usable range of 120-150 mm while the retract end stays fixed. This allows fine end-position tuning without swapping the actuator.
It handles about 1508 N of real work safely, which translates to roughly 128 kg lifted vertically with a 2:1 margin. The -S suffix adds a built-in piston magnet for CMSE/DMSE switches that drop directly into the side grooves. Pneumatic connections use a G3/8 port, and adjustable air cushions of 29 mm at each end absorb kinetic energy near stroke ends.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S Is Used
Press Fit Tuning
Dial in the exact 120-150 mm insertion depth for bearing presses on-site using the external adjuster, avoiding mechanical shim changes.
Variable Transfer Stops
Act as a retractable lane diverter where the extend stop point is tweaked by up to 30 mm to accommodate different package sizes on the fly.
Pallet Positioning
Push pallets into a wrapping station with a consistent 2513 N force, adjusting the final resting position without re-mounting the actuator.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S the Right Cylinder?
When sizing, the neighboring 63 mm bore yields 1559 N push at 0.5 MPa, while the 100 mm bore steps up to 3927 N, so the 80 mm sits perfectly in the middle for medium-heavy loads. The adjustable stroke is ideal when you need to share one spare across multiple stroke variants or fine-tune the end position on-site. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this SKU includes the -S magnet, it is ready for CMSE/DMSE sensors; a standard no-S version cannot accept them. For any stroke at or over 300 mm, always use a guide rail to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it provides 3518 N push and 3175 N pull. The theoretical maximum force is 513 kgf at 1.0 MPa. The air port size is G3/8.
The 150 mm nominal stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 30 mm on-site, giving a usable extend range of 120-150 mm. The retract end is fixed, and this stop sets the end position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X150-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.