Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder brings on-site flexibility to heavy pneumatic motion. The hard-anodized aluminium barrel lacks external tie rods, making the body shorter and more compact than a same-bore ISO 15552 unit. It handles about 1508 N of real work safely, translating to roughly 128 kg lifted vertically with a 2:1 margin.
A built-in piston magnet (-S) allows CMSE or DMSE switches to drop directly into the side grooves for precise position sensing. The external adjuster lets you shorten the extend stroke by up to 100 mm on-site, giving a usable extend range of 100-200 mm from the 200 mm nominal maximum, while the retract end stays fixed. Pneumatic connections use a G3/8 port, and the adjustable air cushions provide 29 mm of deceleration at each end.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S Is Used
Press Stroke Tuning
Dial in the exact 100-200 mm extend reach on a light assembly press without machining new hard stops.
Variable Transfer Pusher
Adjust the push-off distance on the fly as product sizes change on the packaging line.
Shared Spare Inventory
Keep one cylinder on the shelf and set the stop screw to cover any 100-200 mm extend requirement.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S the Right Cylinder?
When sizing this unit, compare the 2513 N push force at 0.5 MPa against the neighbouring 63 mm bore (1559 N) and 100 mm bore (3927 N) to ensure you have the right thrust margin. The 100 mm adjustable window is ideal for sharing a single spare cylinder across multiple stroke variants or fine-tuning the end position after a mechanical change. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this unit includes the -S magnet, it is fully ready for CMSE/DMSE sensors. For any stroke at or above 300 mm, always use a guide rail to prevent side-load damage to the piston rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it provides 3518 N push and 3175 N pull. The theoretical maximum force is 513 kgf at 1.0 MPa. The air port size is G3/8.
The 200 mm nominal stroke is the maximum extend length. An external stop screw lets you shorten the extend stroke by up to 100 mm on-site, giving a usable range of 100-200 mm. The retract end is fixed. This stop sets the end position but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.