Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 300mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke300 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40
Generating 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder is built for heavy-duty positioning. The extruded hard-anodized aluminum body omits tie rods entirely, making it shorter and more compact than a same-bore ISO 15552 unit. It uses a G3/8 port and a 25 mm piston rod.
The external stop screw provides a 40 mm on-site extend-shortening window, allowing you to fine-tune the end position from 260 to 300 mm without swapping the cylinder. In practice it handles about 1508 N of real work, roughly 128 kg lifted vertically. This is a double-acting adjustable-stroke unit; the retract end remains fixed. Note that this specific SKU lacks a magnet, so it cannot take CMSE or DMSE sensors.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 300 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40 Is Used
Press Stroke Tuning
Dial in the exact 260 to 300 mm extend contact point on an assembly press without machining new spacers.
Divertor Gate Adjustment
Shift a heavy conveyor divertor gate end-position by up to 40 mm on-site to accommodate different package widths.
Pallet Stopper Stop
Act as a robust 80 mm bore pallet stopper where the physical contact point needs occasional field adjustment.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40 the Right Cylinder?
For sizing, the neighboring 63 mm bore yields 1559 N push at 0.5 MPa while the 100 mm bore reaches 3927 N, letting you step up or down if the 80 mm class of 2513 N is too tight or too much. The 40 mm adjustable window is ideal for sharing one spare cylinder across multiple stroke variants or dialing in a final stop on-site. Mounting options include FA, LB, TC, TCM1, and TCM2. Because the stroke is 300 mm, always use an external guide to prevent rod bending under side loads. Add the -S suffix if you need CMSE/DMSE magnetic sensing, as this base model cannot accept switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40 FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it provides 3518 N push and 3175 N pull. The theoretical maximum force is 513 kgf at 1.0 MPa. This 80 mm bore unit uses a G3/8 port and features a 25 mm rod with an M22x1.5 thread.
The nominal 300 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 40 mm on-site, giving a usable extend range of 260 to 300 mm. The retract end is fixed. This stop only sets the end position; it does not hold the load on air loss, so use an external rod lock or pilot-operated check valve for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X300-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.