Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 400mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke400 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder is built for heavy-duty adjustment. Its extruded hard-anodized aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 unit. The G3/8 port feeds a 30-800 mm/s speed range, while the M22x1.5 rod thread and 29 mm cushions handle solid end-of-travel deceleration.
The external stop screw lets you shorten the extend stroke on-site by up to 40 mm, giving a usable range of 360-400 mm without swapping the cylinder. It handles about 1508 N of real work safely, which means lifting roughly 128 kg vertically. Because this is an -S SKU, a built-in magnet allows CMSE or DMSE sensors to drop directly into the side grooves for position detection.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 400 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S Is Used
Press Stroke Tuning
Dial in the exact 360-400 mm extend position on a light assembly press without machining new hard stops.
Divert Gate Adjustment
Fine-tune the extend reach of a heavy diverter arm on-site to accommodate varying package widths.
Pallet Stop Positioning
Set the precise end position for a pallet stop gate and lock it in with the external adjuster.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S the Right Cylinder?
When sizing this unit, the 63 mm bore offers 1559 N push at 0.5 MPa for lighter jobs, while the 100 mm bore steps up to 3927 N if you need more power. The 40 mm adjuster is ideal for sharing a spare across stroke variants or fine-tuning the end position on-site. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Since the stroke is 400 mm, always use external guides to prevent rod bending and manage side loads. The retract end remains fixed during adjustment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S FAQ
It pushes 2513 N and pulls 2268 N at 0.5 MPa. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical maximum force is 513 kgf at 1.0 MPa.
The nominal 400 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke on-site by up to 40 mm, yielding a usable range of 360-400 mm. The retract end is fixed, and the adjuster only sets the end position; it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X400-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.