Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 60mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke60 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder saves space by being shorter than a same-bore ISO 15552 unit. It uses a hard-anodized aluminum barrel with no exposed tie rods. The G3/8 port feeds a double-acting single-rod design rated for 30-800 mm/s speeds.
The -10 code means an external adjuster can trim the extend stroke by up to 10 mm on-site. You set the exact 50-60 mm end position without swapping the cylinder. It handles about 1508 N of real work, roughly 128 kg lifted vertically. Note this SKU lacks a magnet, so it cannot take CMSE/DMSE sensors.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10 Is Used
Press Fit Tuning
Dial in the exact 50-60 mm extend end position on-site to seat bearings without bottoming out the tooling.
Divertor Gate
Trim the stroke by 10 mm to adjust the flap angle for a new product size on a packaging line.
Pallet Stop
Set a precise 55 mm stop position to halt pallets while keeping the compact JIS footprint.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10 the Right Cylinder?
For 0.5 MPa push, the 63 mm bore gives 1559 N and the 100 mm bore gives 3927 N. This 80 mm bore fits the middle. The on-site adjuster lets you standardize one spare across slight stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a no-magnet SKU, you cannot fit position sensors. A 60 mm stroke is short, but always guide the load to prevent side-load wear. For load holding on air loss, add an external rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10 FAQ
At 0.5 MPa it pushes 2513 N and pulls 2268 N. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical maximum force is 513 kgf at 1.0 MPa. It has a G3/8 port and a 25 mm rod.
The nominal 60 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 10 mm on-site, giving a usable range of 50-60 mm. The retract end is fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.