Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 600mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke600 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder features a 600 mm stroke with a 10 mm external adjuster for on-site extend tuning. The hard-anodized aluminum barrel keeps the build more compact than a same-bore ISO 15552 unit. It handles about 1508 N of real work, roughly 128 kg lifted vertically with a 2:1 margin. Air connects via G3/8 ports.
The external stop screw lets you shorten the extend stroke down to 590 mm without changing the cylinder, while the retract end remains fixed. This plain SKU lacks a magnet and cannot take CMSE/DMSE sensors. The adjustable air cushions only decelerate the piston near stroke end; they do not hold load on air loss, so use an external rod lock for vertical holding.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10 Is Used
Long-Reach Diversion
Pushes heavy pallets along a transfer line, using the 10 mm adjuster to dial in the exact contact point.
Material Press Down
Lowers a 128 kg tooling head with a 2:1 safety margin, tweaking the extend stop to prevent bottoming out.
Stacker Alignment
Extends to square up large loads, adjusting the final position by a few millimeters without swapping hardware.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10 the Right Cylinder?
When sizing, the 63 mm bore offers 1559 N push at 0.5 MPa, while the 100 mm bore provides 3927 N if you need more force. The 10 mm adjustable window is ideal for sharing a spare across stroke variants or fine-tuning the end position. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a 600 mm stroke, always use external guides to prevent rod bending and side loads. Add the -S variant if you need CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10 FAQ
This 80 mm bore cylinder pushes 2513 N and pulls 2268 N at 0.5 MPa. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical max force is 513 kgf at 1.0 MPa. It uses a G3/8 port and features a 25 mm rod with M22x1.5 thread.
The nominal 600 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 10 mm, giving a usable range of 590 to 600 mm. The retract end is fixed, and this mechanism sets the end position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.