Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 600mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke600 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder provides a 600 mm extend stroke that can be shortened by up to 40 mm on site. The external adjuster lets you fine-tune the end position without swapping the cylinder, giving a usable extend range of 560-600 mm while the retract end stays fixed. Built with an extruded hard-anodized aluminum barrel, it is shorter and more compact than an ISO 15552 cylinder of the same bore. It handles about 1508 N of real work safely, which translates to lifting roughly 128 kg vertically with a 2:1 margin. The G3/8 port feeds the 29 mm adjustable air cushions at both ends.
Because this SKU lacks the -S magnet, it cannot take a CMSE or DMSE sensor. A plain cylinder also does not hold load on air loss, as the cushion only decelerates near the end of travel. For a held load, use an external rod lock or a pilot-operated check valve. With a 600 mm stroke, use external guides to prevent rod bending and manage side loads.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40 Is Used
Conveyor Diverter Tuning
Fine-tune the 600 mm extend reach by up to 40 mm on site to perfectly align a diverter gate without changing the cylinder mount.
Pallet Pusher Adjustment
Shorten the extend stroke to adapt to varying pallet depths on a packaging line, using the 2513 N push force to shift heavy loads.
Vertical Press Positioning
Set the exact 560 to 600 mm lower end position for a pressing operation, safely lowering up to 128 kg with a 2:1 vertical lift margin.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40 the Right Cylinder?
When sizing, the 63 mm bore offers 1559 N push at 0.5 MPa, while the 100 mm bore gives 3927 N. This 80 mm model hits a strong middle ground with 2518 N push and 2268 N pull at 0.5 MPa. The -40 mm adjustable window is ideal for sharing a spare across stroke variants or finalizing end-position tuning on site. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Remember this no-magnet SKU cannot support sensors, and any 600 mm stroke requires external guides to absorb side loads and prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40 FAQ
At 0.5 MPa it pushes 2513 N and pulls 2268 N. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical max force is 513 kgf at 1.0 MPa. It uses a G3/8 port and features a 25 mm rod with M22x1.5 thread.
The nominal 600 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke by up to 40 mm on site, giving a usable extend range of 560-600 mm. The retract end is fixed. This stop sets the end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X600-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.