Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore pneumatic unit brings robust actuation to demanding setups. The G3/8 ported body uses a hard-anodized aluminum profile, making it shorter and more compact than a same-bore ISO 15552 cylinder.
The external adjuster lets you shorten the extend stroke on-site by up to 100 mm, dropping the usable extension from the 700 mm maximum down to 600 mm for fine-tuning end positions without swapping hardware. This SKU lacks a magnet and cannot take a CMSE or DMSE sensor. Factoring a 60% safety margin, it handles about 1508 N of real work, which translates to lifting roughly 128 kg vertically. Remember that the air cushion only decelerates the load; use an external rod lock or pilot-operated check valve to hold position on air loss.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100 Is Used
Long-Transfer Diverter
Pushes heavy pallets across a 600 to 700 mm gap, using the external adjuster to fine-tune the contact point without moving the rear mount.
Multi-Tier Lowering Press
Lowers a 120 kg tooling head on a 80 mm bore, relying on the 100 mm extend window to set precise stopping heights for different product tiers.
Adjustable Stroke Stopper
Acts as a hard stop for varying carton lengths on a packing line, shortening the extend stroke on-site from 700 mm down to 600 mm as needed.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100 the Right Cylinder?
When sizing, the neighboring 63 mm bore yields 1559 N push at 0.5 MPa, while the 100 mm bore steps up to 3927 N, giving you clear scaling options. The 100 mm adjuster window is ideal for sharing a single spare across multiple stroke variants or dialing in final end positions on-site. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a 700 mm stroke, you must support the load with external guides to prevent rod bending and side-load damage. As a non-magnetized SKU, it cannot accept position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100 FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull. At 0.7 MPa it yields 3518 N push and 3175 N pull. The theoretical maximum force is 513 kgf at 1.0 MPa. It features a G3/8 port and a 25 mm rod.
The 700 mm nominal stroke is the maximum extension. The external stop screw lets you shorten the extend stroke on-site by up to 100 mm, giving a usable range of 600 to 700 mm. The retract end remains fixed, and this stopper only sets position without locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X700-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.