Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10
The AirTAC Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø80mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke800 mm
- Port sizeG3/8
- Acting typeDouble acting, adjustable stroke
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10
Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore JIS profile cylinder is built for long-reach automation. The hard-anodized aluminium barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit. It handles about 1508 N of real work safely, which translates to lifting roughly 128 kg vertically with a 2:1 margin. Air connects via a G3/8 port.
The -10 code means an external stop screw lets you shorten the extend stroke on-site by up to 10 mm, giving a usable range of 790-800 mm. You fine-tune the end position without swapping the cylinder, while the retract end stays fixed. This SKU has no magnet, so it cannot take a CMSE or DMSE sensor. Note that the adjustable air cushions only decelerate the load; use an external rod lock or pilot-operated check valve if you need to hold a load on air loss.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10 Is Used
Long-Transfer Pusher
Pushes heavy pallets down a long conveyor line, using the 10 mm adjuster to dial in the exact push-off distance without repositioning the cylinder mount.
Material Lowering Arm
Lowers heavy fixtures vertically, relying on the adjustable cushion to decelerate smoothly at the bottom of the 800 mm travel while a check valve holds the load.
High-Bay Extraction
Extracts goods from deep storage racking, using the compact JIS profile to save space while the stop screw fine-tunes the fully extended reach.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10 the Right Cylinder?
If 2513 N at 0.5 MPa is too much force, step down to the 63 mm bore (1559 N push); if you need more power, the 100 mm bore provides 3927 N. The 10 mm adjuster is perfect for sharing a spare across slightly different 800 mm stroke variants or finalizing end positions on-site. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this is an 800 mm stroke, always support the piston rod against side-load and bending with an external guide to prevent premature wear. Without the -S suffix, this specific SKU cannot accept position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10 FAQ
At 0.5 MPa it pushes 2513 N and pulls 2268 N. At 0.7 MPa it pushes 3518 N and pulls 3175 N. The theoretical maximum force is 513 kgf at 1.0 MPa. It uses a G3/8 port and a 25 mm rod.
The nominal stroke is 800 mm, which is the maximum extend travel. The external adjuster lets you shorten the extend stroke on-site by up to 10 mm, giving a usable range of 790-800 mm. The retract end is fixed, and the adjuster only sets the end position—it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ80X800-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.