Airtac LRM Miniature Linear Guide LRM12N1X395S10CH
The AirTAC Airtac LRM Miniature Linear Guide LRM12N1X395S10CH is a miniature linear guide on a 12 mm stainless-steel rail with recirculating-ball carriage. It is the small end of the range, for light-duty precision positioning in a tight envelope — compact stages, small pick-and-place heads and inspection fixtures.
- SeriesLRM
- Supplied asComplete guide set
- SizeLRM12
- Rail width12 mm
- Carriage lengthStandard carriage
- Carriages1
- Rail length395 mm
- AccuracyH — high grade
- PreloadC — medium preload
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac LRM Miniature Linear Guide LRM12N1X395S10CH
LRM12N1X395S10CH is a complete AirTAC LRM set - one 12 mm wide, 395 mm long stainless-steel rail with a single standard-length recirculating-ball carriage fitted, so nothing else is needed to mount and run it. The C preload grade is the medium option on LRM: it tightens the internal clearances for a firmer-feeling slide, at the cost of a little extra running drag.
Outer covers conceal the fixing screws and shield the double-lip seal strip from larger debris, which suits a bench near chips, fibres or spilled granules. The balls are ISO 3290 G10 Japanese grade, retained in the carriage so they stay put during careful handling. Ambient temperature must not exceed 80 C, peaking at 100 C - worth remembering beside a heater or inside a warm enclosure. LRM publishes no load or moment ratings, so we confirm them for this exact model on request; send the RFQ and we will reply with the figures.
Airtac LRM Miniature Linear Guide LRM12N1X395S10CH Technical Specifications
| Model | Airtac LRM Miniature Linear Guide LRM12N1X395S10CH |
|---|---|
| Series | LRM Series Miniature Linear Guide |
| Supplied as | Complete guide set |
| Construction | Recirculating ball, stainless-steel rail, common-rail design |
| Size code | LRM12 |
| Rail width | 12 mm |
| Carriage length | Standard carriage |
| Carriages supplied | 1 |
| Rail length | 395 mm |
| Load & moment ratings | Not published for this series — ask us to confirm for your model |
|---|---|
| Accuracy grade | H — high grade |
| Preload grade | C — medium preload |
| Mounting screws | M2 or M3 rail screws depending on size |
| Lubrication | Pre-filled with Kyodo Yushi PS No. 2; top up through the rear lubrication hole |
| Ambient temperature | Up to 80 °C ambient, 100 °C transient peak |
| Interchangeability | LRM carriages fit LRM rails of the same model |
Specifications follow the official AirTAC LRM catalogue. The catalogue does not publish load or moment ratings, running parallelism, speed limits, or carriage base material for LRM. We will not quote a figure we cannot source — ask us and we will confirm it for your model.
Model Code: Airtac LRM Miniature Linear Guide LRM12N1X395S10CH
| LRM | LRM Series Miniature Linear Guide. |
|---|---|
| 12 | Size code. |
| N | Standard carriage. |
| 1X395 | 1 carriage on a 395 mm rail. |
| S… | End-hole offset from the rail end, in mm. |
| C | C — medium preload — higher preload raises rigidity and tightens how flat the mounting surface must be. |
| H | H — high grade. |
What Is In The Box
| This order | Complete guide set |
|---|---|
| Rail | Yes, 395 mm |
| Carriage | Yes, 1 |
Rail and carriage(s) supplied together, matched as a set. If you are not sure which form you need, send us the machine or the original part number and we will confirm it before you order.
Where the Airtac LRM Miniature Linear Guide LRM12N1X395S10CH Is Used
Small-parts assembly cell
A light press-fit fixture in a small-parts cell uses the medium preload for a firmer, less forgiving slide that resists drift under repeated positioning.
Print-and-apply labelling head
A labelling head tracks a narrow web on a 12 mm rail; the 395 mm stroke covers a full label pitch while the sealed carriage shrugs off paper dust.
Sample alignment jig
A tensile-test jig aligns slender specimens before a pull; the single standard carriage lets an operator nudge the clamp into line with predictable, damped movement.
Is the Airtac LRM Miniature Linear Guide LRM12N1X395S10CH the Right Guide?
Preload C trades free running for rigidity, so pick it when a stage must not drift, and choose B instead when a light, easy slide matters more. If the load is genuinely substantial or cantilevered, LSH publishes per-carriage dynamic, static and moment ratings you can size against, which LRM does not; for short travels wanting crossed-roller stiffness, look at LGC. Checklist for this SKU: complete set with rail included, 12 mm rail width, standard carriage length, one carriage, 395 mm rail, medium preload C, accuracy H high, top-mount fixing. Install on a ground or finish-milled surface and confirm the load rating with us before committing - the RFQ covers it.
Quick checklist
- ✓ Complete set, carriage only, or rail only?
- ✓ Load and moment confirmed with us
- ✓ Travel length and mounting space
- ✓ Accuracy grade and preload
- ✓ Mounting surface ground or finish-milled
- ✓ Pairing code, if replacing a part
Installation & Maintenance Notes
- check Mounting surface must be ground or finish-milled.
- check Torque the rail screws per the recommended figures, in sequence.
- check Keep the mounting corner radius inside the stated R maximum.
- check Do not angle the carriage onto the rail; balls can drop out.
- check Drive the supplied bolt caps into the mounting holes.
- check Re-grease every 100 km of travel or every 3–6 months.
- check Installation by qualified personnel per AirTAC docs.
Airtac LRM Miniature Linear Guide LRM12N1X395S10CH FAQ
A 12 mm wide stainless-steel rail of 395 mm with a single standard carriage, medium preload C, high accuracy H and top-mount rail fixing. Install on a ground or finish-milled surface, and torque M3 screws to 196 N.cm into steel, 127 N.cm into cast iron or 98 N.cm into aluminium; M2 screws take 58.8, 39.2 or 29.4 N.cm. Ambient temperature must stay at or below 80 C, peaking at 100 C, and re-greasing is due every 100 km of travel or every 3 to 6 months. Load and moment ratings are not published; we confirm them for this model before ordering.
LRM12N1X395S10CH is a complete set - rail and fitted carriage, pre-filled with Kyodo Yushi PS No. 2 grease - so no pairing code applies. Carriage-only codes end in BK and carry a pairing letter A to E that must match the rail, so a replacement carriage needs the letter taken off the original part. We hold very few carriage-only SKUs, so most spares are special orders - one more reason to handle this set's carriage carefully and keep it on the rail.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac LRM Miniature Linear Guide LRM12N1X395S10CH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours. We can also confirm the load and moment rating for this model.