Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S is a genuine double-acting aluminum-barrel mini cylinder with a Ø25mm bore, a 100mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 90–100mm. Adjustable air cushion (both ends).
- BoreØ25 mm
- Stroke100 mm
- Adjustable90–100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S
The AirTAC MBLCJ25X100-10S is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and tunable air cushions at both ends. It delivers 245 N push and 206 N pull force at 0.5 MPa. The rear stopper allows you to trim up to 10 mm of travel, creating a precise 90-100 mm usable stroke window for exact end positioning.
Unlike the fixed rubber bumper on the base MBLJ, the screw-tunable cushions on this unit decelerate heavier loads at high speeds to protect the end covers. The riveted rolling-packed barrel and 20 µm hard-chrome plated carbon-steel rod ensure durability. Fitted with a built-in magnet (-S), it supports AirTAC CMSG reed and DMSG/EMSG electronic sensors for position detection.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø25 mm |
| Nominal stroke | 100 mm |
| Adjustable window | 90–100 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 300 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S Is Used
PCB Router Gating
Uses the 90-100 mm fine-tuned stroke window to actuate a routing machine gate, absorbing the 245 N impact via adjustable cushions to protect aluminum end covers.
Textile Tension Arm
Leverages the -S magnet and DMSG electronic switch to confirm arm position, while the rear stopper dials in the exact 10 mm trim for fabric tensioning.
Bottle Diverter Arm
Employs the dual end cushions to smoothly decelerate the diverter at high cycling speeds, preventing liquid sloshing in lightweight plastic bottles.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S the Right Cylinder?
Choose this 25 mm bore when you need 245 N of push force at 0.5 MPa. If your payload is lighter, step down to the 20 mm bore (157 N push); for heavier drives, step up to the 32 mm bore (402 N push). Compared to the fixed-stroke MBLC, this model adds a rear stopper for exact travel limits, while offering superior end-cover protection over the MBLJ bumper.
Remember that the rear adjuster is a travel stop, not a load lock, and the air cushion only decelerates; neither holds position pneumatically. Mounting is limited to Basic, FA, or LB (no SDB or back-cover options). To replace this unit, match the 25 mm bore, 100 mm stroke, 10 mm adjust code, G1/8 port, PT thread, and the -S magnet. Since the stroke is 100 mm, use an external guide to prevent rod bending on the 10 mm shaft.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S FAQ
At 0.5 MPa it provides 245 N push and 206 N pull. At 0.7 MPa push increases to 343 N. The maximum theoretical force is 50 kgf at 1.0 MPa.
The adjustable stroke uses a rear stopper to mechanically limit travel between 90 and 100 mm. The adjustable air cushion uses a screw valve to tune end-of-stroke deceleration. Neither acts as a lock to hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ25X100-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.