Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10 is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 15mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 5–15mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke15 mm
- Adjustable5–15 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10
The AirTAC MBLCJ32X15-10 is a compact double-acting aluminum mini cylinder engineered for fine-tuned motion control. It features a rear stroke stopper that trims up to 10 mm of travel, creating a tight 5-15 mm usable window for exact positioning. Delivering 402 N of push force at 0.5 MPa, this unit integrates a screw-tunable air cushion at both ends to decelerate the rod smoothly, preventing end-cover damage during rapid cycles.
Built with a riveted rolling-packed barrel and a 20 µm hard-chrome plated carbon-steel rod, it withstands demanding environments. The grease-retaining two-way piston seal ensures long lubrication life. Because this specific SKU lacks the -S magnet code, it cannot accept CMSG, DMSG, or EMSG position sensors. The rear adjuster sets the physical travel end, while the separate cushion needle regulates end-of-stroke deceleration—neither component acts as a mechanical lock to hold a load in place.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10 Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 15 mm |
| Adjustable window | 5–15 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10 Is Used
PCB Drill Bit Changer
Handles rapid tool swapping in automated PCB drilling heads, using the 5-15 mm adjustable window to dial in the exact insertion depth without crashing the spindle.
Pharma Vial Stoppering
Presses rubber stoppers into glass vials on a high-speed filling line, relying on the tunable air cushion to decelerate the 402 N push force gently and prevent glass fracture.
Leather Punch Indexing
Feeds thin leather stock through an industrial cutting press, using the short 15 mm stroke and rear stopper to advance the material precisely without over-travel.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10 the Right Cylinder?
When sizing this 32 mm bore, compare its 402 N push force at 0.5 MPa against the smaller 25 mm bore (245 N push) or the larger 40 mm bore (628 N push) to match your payload. Choose the MBLCJ over the MBLJ when your application requires tunable end-deceleration instead of a fixed rubber bumper, or over the MBLC when you need that rear travel-stopper to trim the stroke. To replace this unit, match the 32 mm bore, 15 mm stroke, 10 mm adjust code, G1/8 PT port, and Basic mounting. Since no -S code is present, no sensor is fitted. Mounting is limited to Basic, FA flange, or LB foot; SDB pivot and back-cover options are not available on this profile.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10 FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force reaches 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
The rear adjuster is a mechanical travel stop that sets the physical end-of-stroke within a 5-15 mm window. The air cushion uses a screw needle to tune deceleration. Neither holds a load in place; you need external lock mechanisms for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X15-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.