Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10 is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 175mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 165–175mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke175 mm
- Adjustable165–175 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10
The AirTAC MBLCJ32X175-10 is a compact double-acting aluminum mini cylinder engineered for precise motion control. It features a rear travel stopper allowing you to trim up to 10 mm of travel, creating a usable stroke window of 165-175 mm. Unlike the base MBLJ which relies on a fixed rubber bumper, this SKU incorporates a screw-tunable adjustable air cushion at both ends to decelerate the piston near the stroke extremes. Delivering 402 N of push force and 346 N of pull force at 0.5 MPa, it is built with a riveted rolling-packed barrel and a 20 um hard-chrome plated carbon-steel rod.
This 32 mm bore model uses an M10x1.25 rod-end thread and a G1/8 port. Because this specific SKU lacks the -S magnet suffix, it cannot accept an AirTAC CMSG, DMSG, or EMSG position sensor. The rear stroke adjuster functions strictly as a mechanical travel stop, not a load-holding lock; the adjustable cushion only governs end-of-stroke deceleration, meaning the rod will drift if air pressure is removed. Overall length equals A plus twice the stroke plus the 10 mm adjustment range.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10 Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 175 mm |
| Adjustable window | 165–175 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10 Is Used
PCB Router Z-Axis
Governs the vertical plunge of a spindle motor on a PCB depaneling router. The 165-175 mm window hits the exact cutting depth, while the cushion prevents spindle bounce at the stroke end.
Dispenser Nozzle Diving
Drives a fluid dispensing nozzle down into a deep container. The 402 N push force at 0.5 MPa overcomes fluid back-pressure, and the 10 mm rear trim dials in the exact submersion depth.
Textile Guide Tensioning
Actuates a fabric guide bar in a textile loom. The 175 mm stroke accommodates wide weave patterns, and the riveted aluminum barrel withstands humid production environments.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10 the Right Cylinder?
When sizing this 32 mm bore cylinder, stepping down to a 25 mm bore reduces the output to 245 N push at 0.5 MPa, whereas stepping up to a 40 mm bore increases the push force to 628 N at 0.5 MPa. Choose the MBLCJ over the MBLJ when your application requires tunable end-of-stroke deceleration to protect the end covers during heavier moves, or select the MBLC if you prefer a fixed stroke without the rear adjuster. Remember that neither the rear travel stopper nor the air cushion acts as a lock; use an external guide to manage side loads on the 12 mm rod. Mounting is restricted to Basic, FA (flange), or LB (foot) configurations, as there is no SDB pivot or back-cover option. For a drop-in replacement, match the 32 mm bore, 175 mm stroke, 10 mm adjust code, G1/8 PT port, and the non-magnetized state.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10 FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force reaches 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
This SKU lacks the -S suffix, so it has no built-in magnet and cannot accept CMSG, DMSG, or EMSG sensors. The 10 mm rear adjustment is a travel stop that sets the 165-175 mm end position, not a lock; the air cushion only decelerates the piston, so the rod drifts if air is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.