Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 175mm nominal stroke and a rear adjustable-stroke stopper — trim up to 75mm for a usable window of 100–175mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke175 mm
- Adjustable100–175 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S
The AirTAC MBLCJ32X175-75S is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and a tunable air cushion at both ends. It delivers 402 N of push force at 0.5 MPa through a 32 mm bore. The rear stopper allows you to trim up to 75 mm of travel, creating a usable stroke window of 100 to 175 mm for precise end-positioning.
This SKU includes a built-in magnet (-S) for compatibility with AirTAC CMSG reed and DMSG/EMSG electronic sensors. The riveted rolling-packed barrel and 20 um hard-chrome carbon-steel rod withstand rapid cycling, while the heterogeneous two-way grease-retaining piston seal maintains lubrication. Unlike the fixed bumper on an MBLJ, the adjustable cushion screw lets you dial in end-of-stroke deceleration to protect the end covers during heavier moves.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 175 mm |
| Adjustable window | 100–175 mm (trim 75 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Nominal stroke length in mm. |
| -75 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S Is Used
PCB Router Z-Axis
Depths of cut on a printed circuit board router are dialed in using the 100-175 mm stroke window, while the air cushion prevents end-cover shock during rapid 402 N plunging.
Textile Take-Up Tensioner
Maintains consistent fabric tension by trimming the rear stroke to match beam stretch, using the tunable cushion to softly decelerate the 12 mm rod at high cycling speeds.
Carton Flap Folder
Folds corrugated carton flaps at 563 N of push force at 0.7 MPa, relying on the -S magnet to trigger the DMSG sensor for precise glue-line timing.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S the Right Cylinder?
If your application requires less force, stepping down to the 25 mm bore yields 245 N of push at 0.5 MPa. For heavier payloads, the 40 mm bore provides 628 N. The MBLCJ is ideal when you need both position trimming and shock tuning; choose the MBLJ if a fixed rubber bumper suffices, or the MBLC if your stroke length is fixed. Remember that the rear adjuster is a travel stop, not a lock—the cushion only decelerates, so use an external lock for position holding. Mounting is limited to Basic, FA, or LB (no SDB or back-cover options). For a direct replacement, match the 32 mm bore, 175 mm stroke, 75 mm adjust code, G1/8 PT port, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
The adjustable stroke uses a rear stopper to mechanically set the travel end within a 100-175 mm window. The adjustable air cushion uses a screw to tune end-of-stroke deceleration. Neither holds the load; they are stops and dampers, not locks.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X175-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.