Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 25mm nominal stroke and a rear adjustable-stroke stopper — trim up to 20mm for a usable window of 5–25mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke25 mm
- Adjustable5–25 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S
The AirTAC MBLCJ32X25-20S is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and a tunable air cushion at both ends. It delivers 402 N of push force at 0.5 MPa through a 32 mm bore. The 20 mm adjustment code lets you trim the rear travel, creating a usable stroke window of 5 to 25 mm for precise positioning tasks.
Unlike the fixed rubber bumper on an MBLJ, this model uses screw-tunable deceleration to protect the end covers during faster moves. The rear stopper sets the travel end but does not lock the load; a separate external guide is recommended to prevent side-load bending on the Ø12 mm rod. The -S code equips a built-in magnet for CMSG reed or DMSG/EMSG solid-state sensors.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 25 mm |
| Adjustable window | 5–25 mm (trim 20 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -20 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S Is Used
PCB Drill Depth Stop
Sets a 5-25 mm micro-adjustable travel window for drill heads in PCB prototyping, using the 402 N force to drive the bit while the air cushion prevents cover damage on fast retracts.
Dispenser Valve Snubber
Tunes the end-of-stroke deceleration for adhesive dispenser valves, ensuring the 346 N pull retracts the nozzle cleanly without sudden shocks that would break the fluid seal.
Textile Loom Tensioner
Trims the rear stroke by 20 mm to synchronize yarn tensioning arms on a weaving loom, relying on the DMSG solid-state sensor to confirm the exact 5 mm minimum position.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S the Right Cylinder?
If you need less force, step down to the 25 mm bore (245 N push at 0.5 MPa); if your payload is heavier, step up to the 40 mm bore (628 N push). Choose this MBLCJ over an MBLJ when your cycle speed requires tunable end-cover protection, or over an MBLC when you need that 5-25 mm rear travel window. Remember, the adjuster is a travel stop and the cushion only decelerates—neither holds position pneumatically.
For exact replacement, match the 32 mm bore, 25 mm stroke, 20 mm adjust code, G1/8 port, PT thread, Basic/FA/LB mounting, and the -S magnet. Mounting is limited to Basic, FA, or LB; there is no SDB pivot or back-cover option. Overall length extends based on A + 2 x stroke + adjust.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N push and 346 N pull. At 0.7 MPa, push increases to 563 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
The rear adjuster physically stops the piston within a 5 to 25 mm usable window, setting the end position. The adjustable air cushion only tunes the deceleration speed near that end. Neither mechanism locks the load; position holding requires live air or an external lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X25-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.