Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 30mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 20–30mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke30 mm
- Adjustable20–30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S
The AirTAC MBLCJ32X30-10S is a compact, double-acting aluminum mini cylinder with a single Ø12 mm rod. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. The rear stroke adjuster allows you to trim up to 10 mm of travel, creating a usable 20-30 mm end-position window. This is paired with an adjustable air cushion at both ends, letting you screw-tune the end-of-stroke deceleration to protect the end covers from heavier or faster moves.
Unlike the base MBLJ which relies on a fixed rubber bumper, this MBLCJ provides tunable cushioning for precise stopping. The -S code means a built-in magnet is fitted, enabling compatibility with AirTAC CMSG reed switches alongside DMSG and EMSG solid-state sensors for position detection. The riveted rolling-packed barrel and 20 µm hard-chrome plated carbon-steel rod ensure durable, low-friction operation even at speeds up to 800 mm/s.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 30 mm |
| Adjustable window | 20–30 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S Is Used
PCB Router Z-Axis
Lifts and lowers a spindle on a PCB depaneling router. The 402 N push force handles the carriage weight, while the 20-30 mm stroke window dials in the exact cutting depth.
Label Applicator Tamp
Applies tamp pressure to labels on a packaging line. The dual adjustable air cushion prevents label slippage by tuning the deceleration at the end of the 30 mm travel.
Textile Yarn Guide
Shifts a yarn guide back and forth across a weaving machine. The 800 mm/s speed capability and DMSG sensor tracking ensure high-speed, synchronized positioning.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S the Right Cylinder?
If you need less force, stepping down to a 25 mm bore yields 245 N push at 0.5 MPa. Stepping up to a 40 mm bore provides 628 N, which is better for heavier loads. Choose the MBLCJ over the MBLJ when your application requires tunable end-of-stroke deceleration rather than a basic fixed bumper, or over the MBLC if you need this rear travel-stop adjustability rather than a fixed stroke. The rear adjuster sets the travel end and the cushion only decelerates; neither holds the load, so use an external guide or lock for position holding.
Mounting is limited to Basic, FA (flange), or LB (foot); there is no SDB pivot or back-cover option. The overall length equals A + 2 x stroke + adjust. For an exact replacement, match the 32 mm bore, 30 mm stroke, 10 mm adjust code, G1/8 port, PT thread, and the -S magnet. The M10x1.25 rod-end thread handles the connection to your load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
The rear adjuster is a mechanical travel stop that lets you trim up to 10 mm of rear travel, setting a 20-30 mm usable window. The adjustable air cushion is a screw-tunable valve that controls end-of-stroke deceleration. The adjuster sets the position, the cushion controls the speed; neither acts as a lock to hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X30-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.