Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40 is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 450mm nominal stroke and a rear adjustable-stroke stopper — trim up to 40mm for a usable window of 410–450mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke450 mm
- Adjustable410–450 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40
The AirTAC MBLCJ32X450-40 is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and an adjustable air cushion at both ends. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. The rear stopper allows you to trim up to 40 mm of travel, creating a usable stroke window of 410 to 450 mm for exact end-positioning.
Unlike the fixed rubber bumper found on the MBLJ series, the screw-tunable air cushion on this unit decelerates heavy loads over a 450 mm extension, protecting the end covers from impact shock. The riveted rolling-packed aluminum barrel and 20 um hard-chrome plated carbon-steel rod handle speeds of 30-800 mm/s. Note that this specific SKU lacks a built-in magnet, so it cannot accept CMSG, DMSG, or EMSG position sensors.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40 Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40 |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 450 mm |
| Adjustable window | 410–450 mm (trim 40 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Nominal stroke length in mm. |
| -40 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40 Is Used
Textile Loom Takedown
Provides 402 N of push to strip woven fabric from the loom beam, using the 410-450 mm adjustable window to sync exact material roll widths without moving the cylinder base.
Pallet Pusher Assembly
Transfers heavy wooden pallets onto a packaging line, relying on the adjustable air cushion to decelerate the 450 mm stroke smoothly and prevent end-cover shock damage.
Composite Press Ejection
Ejects cured carbon-fiber panels from a heated mold, utilizing the 346 N pull force and rear stopper to guarantee the press fully retracts before the mold opens.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40 the Right Cylinder?
If you need less force, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N for heavier payloads. Choose this MBLCJ over the fixed-stroke MBLC when you need to fine-tune the travel limit, or over the bumper-only MBLJ when moving substantial mass at high speeds. Remember the rear adjuster is a travel stop, not a lock; it sets the end point but does not hold the load pneumatically. Mounting is limited to Basic, FA flange, or LB foot brackets (no SDB or back-cover options). For an exact replacement, match the 32 mm bore, 450 mm stroke, 40 mm adjust code, G1/8 port, PT thread, and confirm no magnet is required. At this 450 mm stroke, the 12 mm rod is highly susceptible to side-load bending; always use an external guide rail to prevent cylinder damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N push and 346 N pull force. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa operating pressure. It operates at speeds between 30-800 mm/s.
The rear adjuster physically limits the piston's travel, allowing you to trim up to 40 mm from the 450 mm stroke for a 410-450 mm window. The adjustable air cushion only controls the deceleration rate at the stroke ends. Neither feature locks or holds the load in place; you need live air or an external lock for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X450-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.