Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 60mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 50–60mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke60 mm
- Adjustable50–60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S
The AirTAC MBLCJ32X60-10S is a compact double-acting mini cylinder featuring a Ø12 mm carbon-steel rod and a 32 mm bore, delivering 402 N of push force at 0.5 MPa. It integrates a rear travel stopper that allows you to trim up to 10 mm of movement, creating a precise 50-60 mm usable stroke window. This is paired with an adjustable air cushion at both ends to tune end-of-stroke deceleration, absorbing kinetic energy to protect the end covers during faster cycling.
Unlike the base MBLJ which relies on a fixed rubber bumper, this model’s screw-tunable cushioning provides superior shock absorption for heavier 32 mm loads. The riveted aluminum barrel and heterogeneous two-way grease-retaining piston seal keep the 20 µm hard-chrome plated rod moving smoothly. A built-in magnet (-S) enables position detection, while the rear stopper sets the travel end without mechanically locking the load in place.
Selecting this 32 mm bore requires weighing your force and travel needs against neighboring sizes. If 402 N at 0.5 MPa is excessive, stepping down to the 25 mm bore yields 245 N of push force; conversely, upgrading to the 40 mm bore provides 628 N for heavier mechanisms. The MBLCJ differs from the fixed-stroke MBLC by offering the 10 mm rear trim window, and from the MBLJ by replacing the fixed bumper with tunable air cushioning. Remember that the rear adjuster is a travel stop, not a lock—the cylinder cannot hold a load without live air pressure. Mounting is limited to Basic, FA flange, or LB foot styles (no SDB or back-cover options), extending overall length to A + 2 x 60 + 10. For a drop-in replacement, match the 32 mm bore, 60 mm stroke, 10 mm adjust code, G1/8 PT port, and the -S magnet specification.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 60 mm |
| Adjustable window | 50–60 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S Is Used
PCB Router Z-Axis
Drives a spindle router bit up and down with a 50-60 mm stroke window, using the adjustable air cushion to soften the rapid tool retraction after cutting fiberglass boards.
Bottle Capper Head
Applies 402 N of push force at 0.5 MPa to press plastic screw caps onto beverage containers, using the rear stopper to dial in the exact 10 mm trim for varying bottle heights.
Textile Loom Takedown
Actuates a fabric guide arm within a 60 mm travel range, where the built-in magnet triggers a DMSG solid-state sensor to confirm the rod position before the loom cycles.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S the Right Cylinder?
When sizing your pneumatic drive, step down to the 25 mm bore (245 N push @0.5 MPa) for lighter tasks, or step up to the 40 mm bore (628 N push @0.5 MPa) if your mechanism requires more thrust. The MBLCJ32X60-10S provides a 50-60 mm usable stroke window and tunable air cushioning, unlike the fixed-stroke MBLC or the bumper-only MBLJ. The rear adjuster is a travel stop, not a lock; a plain cylinder drifts without live air. Mounting is restricted to Basic, FA, or LB styles (no SDB or back-cover code). To match this SKU exactly, specify the 32 mm bore, 60 mm stroke, 10 mm adjust code, G1/8 PT port, and the -S magnet for CMSG/DMSG/EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S FAQ
The 32 mm bore generates 402 N push and 346 N pull at 0.5 MPa, increasing to 563 N push at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa pressure and cycles at speeds of 30-800 mm/s.
The adjustable stroke is a rear travel stopper that trims the end position up to 10 mm (giving a 50-60 mm usable window), but it does not lock the load. The adjustable air cushion is a separate screw-tunable valve at each end that regulates exhaust flow to decelerate the piston, protecting the end covers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.