Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 60mm nominal stroke and a rear adjustable-stroke stopper — trim up to 40mm for a usable window of 20–60mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke60 mm
- Adjustable20–60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S
The AirTAC MBLCJ32X60-40S is a compact double-acting mini cylinder featuring a 32mm bore and a 60mm stroke. It combines a rear travel stopper that trims up to 40mm, giving you a usable 20-60mm end-position window, with screw-tunable air cushions at both ends. This tunable deceleration absorbs kinetic energy to protect the end covers during faster or heavier moves, a distinct advantage over the fixed rubber bumper found on the MBLJ series. Delivering 402N push and 346N pull at 0.5 MPa, it suits precise mid-range actuation.
Built with a riveted rolling-packed aluminum barrel and a 20um hard-chrome plated carbon-steel rod, the body handles harsh environments while the heterogeneous two-way grease-retaining piston seal maintains lubrication over a 30-800mm/s speed range. The -S code indicates a built-in magnet for position detection. It pairs with AirTAC CMSG reed switches or DMSG and EMSG solid-state electronic sensors. The rear stopper sets your travel end but does not mechanically hold the load, and the cushion only decelerates; neither acts as a lock.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 60 mm |
| Adjustable window | 20–60 mm (trim 40 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -40 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S Is Used
PCB Depanelling Router
Drives the cutting head across composite panels, using the 20-60mm stroke window to dial the exact cut depth while the air cushion prevents end-cover damage during rapid routing.
Bottle Capper Heads
Applies precise 402N downward torque on plastic caps, adjusting the stroke for varied bottle heights and tuning the cushion to decelerate before the thread engagement stops.
Textile Fabric Guiding
Tensions fabric webs in automated looms, using the DMSG solid-state sensor to confirm the 32mm rod position and the tunable stopper to correct edge alignment.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S the Right Cylinder?
When sizing this 32mm bore, stepping down to a 25mm bore reduces your force to 245N push at 0.5 MPa, while stepping up to a 40mm bore increases it to 628N. Choose this MBLCJ model over the MBLJ when you need tunable end-of-stroke cushioning rather than a fixed bumper, or over the MBLC if you require the 20-60mm rear travel adjustment rather than a fixed stroke. For replacement, match the 32mm bore, 60mm stroke, 40mm adjust code, G1/8 port, PT thread, Basic/FA/LB mounting, and the -S magnet. Mounting is limited to Basic, FA flange, or LB foot; no SDB pivot or back-cover options exist. Because the 12mm rod is small, long strokes require an external guide to prevent side-load bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N push and 346N pull. At 0.7 MPa, the push force is 563N. The maximum theoretical force is 82 kgf at 1.0 MPa.
The rear adjustable stroke is a mechanical travel stopper that trims up to 40mm of travel, giving a 20-60mm usable window, but it does not lock or hold the load. The adjustable air cushion is a screw-tunable valve that controls exhaust flow to decelerate the piston near the end caps. Neither feature acts as a brake or position lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X60-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.