Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S is a genuine double-acting aluminum-barrel mini cylinder with a Ø32mm bore, a 75mm nominal stroke and a rear adjustable-stroke stopper — trim up to 20mm for a usable window of 55–75mm. Adjustable air cushion (both ends).
- BoreØ32 mm
- Stroke75 mm
- Adjustable55–75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S
The AirTAC MBLCJ32X75-20S is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and an adjustable air cushion at both ends. The rear stopper trims up to 20 mm of travel, creating a usable extension window of 55 to 75 mm. Delivering 402 N of push force at 0.5 MPa, this 32 mm bore unit is built for mid-range actuation where precise end-positioning is required. It includes a built-in magnet (-S) for solid-state DMSG or reed CMSG sensor integration.
Unlike the fixed rubber bumper found on the base MBLJ, the screw-tunable cushion on this MBLCJ allows you to regulate end-of-stroke deceleration, absorbing kinetic energy to protect the end covers during faster cycling. The 12 mm carbon-steel rod features 20 µm hard-chrome plating, and the riveted rolling-packed barrel utilizes a heterogeneous two-way grease-retaining piston seal. Note that the rear stopper sets the travel end and the cushion only decelerates; neither component mechanically locks the load in place.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø32 mm |
| Nominal stroke | 75 mm |
| Adjustable window | 55–75 mm (trim 20 mm) |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -20 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S Is Used
PCB Router Clamping
Holds printed circuit board panels securely during routing operations. The 402 N clamping force prevents panel shifting, while the 55-75 mm stroke window allows exact height matching for varying stack thicknesses.
Label Applicator Stroke
Drives the applicator head in packaging lines. The 20 mm rear stroke adjustment permits on-the-fly tuning of the extension distance without moving the cylinder mount, ensuring precise label placement.
Textile Yarn Guide
Actuates a yarn guide bar across a knitting machine. The adjustable air cushion decelerates the 346 N pull force at stroke ends, preventing sudden jerks that would snap delicate synthetic threads.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S the Right Cylinder?
Choose this 32 mm bore when an application demands 402 N of push force at 0.5 MPa within a 55-75 mm stroke window. If your payload is lighter, stepping down to the 25 mm bore drops the output to 245 N, whereas upgrading to the 40 mm bore increases push force to 628 N. The adjustable air cushion makes this series preferable over the MBLJ when moving heavier masses at higher speeds, as the cushion actively bleeds trapped air to prevent end-cover impact. For fixed-stroke tasks without the rear trimmer, select the MBLC variant.
When replacing this cylinder, match the 32 mm bore, 75 mm nominal stroke, 20 mm adjust code, G1/8 port, M10x1.25 rod thread, and the -S magnet. Mounting is restricted to Basic, FA, or LB styles; this series does not accept SDB pivots or back-cover codes. Because the 75 mm stroke is well within the 500 mm maximum standard for this bore, side-load risks are minimal, but external guides should still support any lateral forces to prevent bending the 12 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 346 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf when operated at the 1.0 MPa pressure limit.
The rear stroke adjustment is a mechanical travel stop that limits the rod extension, creating a 55-75 mm usable window for this specific model. The adjustable air cushion, located at both ends, uses a needle screw to tune end-of-stroke deceleration. Neither the stopper nor the cushion acts as a mechanical lock to hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ32X75-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.