Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S is a genuine double-acting aluminum-barrel mini cylinder with a Ø40mm bore, a 200mm nominal stroke and a rear adjustable-stroke stopper — trim up to 100mm for a usable window of 100–200mm. Adjustable air cushion (both ends).
- BoreØ40 mm
- Stroke200 mm
- Adjustable100–200 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S
The AirTAC MBLCJ40X200-100S is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and an adjustable air cushion at both ends. It delivers 628 N of push force and 528 N of pull force at 0.5 MPa. The 100 mm adjustment code lets you trim the rear travel stopper, creating a usable stroke window from 100 mm to 200 mm to fine-tune the end position without mechanical shims.
Unlike the fixed rubber bumper found on the MBLJ series, the screw-tunable end cushions on this SKU allow you to dial in deceleration for heavier 200 mm traverses, protecting the end covers. The built-in magnet (-S) enables position detection using AirTAC CMSG reed or DMSG/EMSG electronic switches. The riveted rolling-packed barrel and 20 µm hard-chrome plated carbon-steel rod ensure durable, low-friction operation.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø40 mm |
| Nominal stroke | 200 mm |
| Adjustable window | 100–200 mm (trim 100 mm) |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S Is Used
PCB Router Z-Axis
Lifts and lowers a routing spindle across the 100-200 mm window. The adjustable cushion decelerates the 628 N push force smoothly to protect the spindle bearings at stroke end.
Packaging Flap Folder
Actuates carton folding arms at high cycle rates. The rear travel stopper sets the exact 150 mm fold depth, while the magnet confirms arm retraction via a DMSG sensor.
Textile Loom Beam Shift
Transfers heavy warp beams laterally. The tunable air cushions absorb the kinetic energy of the 16 mm rod and attached load, preventing end-cover damage during rapid 200 mm shifts.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S the Right Cylinder?
Stepping down to the 32 mm bore drops the 0.5 MPa push force to 402 N, while stepping up to the 50 mm bore increases it to 981 N. Choose this 40 mm model when your payload requires roughly 60 kg of push force at standard pressure. Select MBLCJ over MBLJ when your moving mass demands tunable end-of-stroke deceleration rather than a fixed impact bumper, or choose MBLC if you need a fixed stroke without a rear adjuster.
Remember that the rear adjuster is a travel stop, not a lock; it sets the endpoint but does not hold the load, and the cushion only decelerates. Mounting is limited to Basic, FA, or LB styles, as no back-cover or SDB pivot option exists. To replace this unit, match the 40 mm bore, 200 mm stroke, 100 mm adjust code, G1/4 port, PT thread, and -S magnet. Since the stroke is 200 mm, use an external guide to prevent side-loading on the Ø16 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S FAQ
At 0.5 MPa it provides 628 N push and 528 N pull. At 0.7 MPa push increases to 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa.
The rear adjuster mechanically limits the stroke, creating a usable travel window of 100 to 200 mm. It is a travel stop, not a lock, and will not hold a load in place without live air pressure. The separate adjustable air cushion only controls end-of-stroke deceleration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.