Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S
The AirTAC Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S is a genuine double-acting aluminum-barrel mini cylinder with a Ø40mm bore, a 200mm nominal stroke and a rear adjustable-stroke stopper — trim up to 10mm for a usable window of 190–200mm. Adjustable air cushion (both ends).
- BoreØ40 mm
- Stroke200 mm
- Adjustable190–200 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable air cushion (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S
The AirTAC MBLCJ40X200-10S is a compact double-acting aluminum mini cylinder featuring a rear stroke adjuster and a tunable air cushion at both ends. The integrated -S magnet allows CMSG, DMSG, or EMSG sensor switches to track rod position. A Ø16 carbon-steel rod with 20 μm hard-chrome plating drives 628 N of push force at 0.5 MPa. The 10 mm rear trimmer yields a usable 190-200 mm travel window, making it ideal for fine-tuning end positions in mid-range packaging equipment.
Screw-tunable end cushions decelerate heavier 64 kg payloads to protect the end covers, a distinct advantage over the fixed bumper found on the MBLJ series. The riveted rolling-packed barrel pairs with a heterogeneous two-way grease-retaining piston seal to maintain consistent lubrication over millions of 30-800 mm/s cycles. Note that the rear stopper sets the travel end; it does not mechanically lock the load in place.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S Technical Specifications
| Model | Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder (adjustable stroke) |
| Bore size | Ø40 mm |
| Nominal stroke | 200 mm |
| Adjustable window | 190–200 mm (trim 10 mm) |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion (both ends) |
| Max standard stroke | Up to 500 mm |
The rear stopper sets the end position — it is a travel stop, not a lock. Overall length = A + 2 × stroke + adjustable stroke. MBLJ/MBLCJ mounting is Basic / FA / LB only (no SDB, no back-cover code). Thread options: PT / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a margin.
Model Code: Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S
| MBLCJ | MBLCJ aluminum-barrel adjustable-stroke mini cylinder with adjustable cushion. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke amount (mm you can trim at the rear). |
| S | Optional built-in magnet for a CMSG/DMSG/EMSG sensor switch. |
Related: MBLJ (adjustable stroke, fixed bumper), MBL (fixed stroke), MBLD (double rod).
Where the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S Is Used
Carton Erector Arms
Drives the folding mechanism on continuous-motion carton erectors where 628 N of push force securely creases heavy corrugated board, while the air cushion absorbs the 200 mm stroke impact.
Bottle Diverters
Positions guide rails on rotary bottle filling lines; the 190-200 mm adjustable window lets operators dial in exact lane spacing without moving physical hard stops.
Pallet Strappers
Feeds strapping heads on automated pallet wrappers, using the M12x1.25 rod-end thread to attach a custom feed guide that maintains tension across the 200 mm extension.
Is the Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S the Right Cylinder?
This 40 mm bore delivers 628 N push and 528 N pull at 0.5 MPa. If your assembly needs less force, step down to the 32 mm bore (402 N push), or step up to the 50 mm bore (981 N push) for heavier lifting. The MBLCJ is preferred over the MBLJ when you need active end-of-stroke deceleration rather than a fixed rubber bumper. For fixed travel without a rear adjuster, choose the MBLC series.
When ordering a replacement, verify the 40 mm bore, 200 mm stroke, 10 mm adjust code, G1/4 port, PT thread, and the -S magnet. Mounting is limited to Basic, FA flange, or LB foot; there is no SDB pivot or back-cover option. Because the rear adjuster is a travel stop and the cushion only decelerates, any requirement to hold position without live air requires an external locking device.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Adjustable window fits your end position
- ✓ Adjuster is a travel stop, not a lock
- ✓ Magnet (S) for sensors?
- ✓ Side load — add a guide on long strokes
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear stopper for the end position (a travel stop, not a lock).
- check Avoid side load; add an external guide on long strokes.
- check Mounting: Basic / FA flange / LB foot (no SDB, no back-cover code).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S FAQ
At 0.5 MPa, the 40 mm bore generates 628 N push and 528 N pull force. At 0.7 MPa, push increases to 880 N. The maximum theoretical force is 128 kgf at 1.0 MPa.
The 10 mm rear adjuster is a mechanical travel stop that sets your usable extension window between 190-200 mm. The adjustable air cushion is a separate screw-tunable valve that controls hydraulic-style deceleration at the stroke ends to prevent end-cover damage. Neither feature locks the load in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Adjustable-Stroke Cylinders
Request a Quote for Airtac MBLCJ Adjustable Mini Cylinder MBLCJ40X200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.